VDE-Kabel H07V-U1,5HBL-R100, EAN: 4013728021772

VDE-Kabel H07V-U 1,5 Cable light blue

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-U / R

VDE-Kabel H07V-U 1,5 Cable light blue

Lieske Part No. 480929
Mfg Part No H07V-U1,5HBL-R100
EAN-Code 4013728021772
Manufacturer VDE-Kabel
Here only 26,90 EUR
32,01 EUR incl. VAT

Further information for VDE-Kabel H07V-U 1,5 Cable light blue

General
Nominal voltage450/750 V
Test voltage2500 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter
Flame retardancyaccording to VDE 0472 T. 804 test type B (=IEC 332-1)
ConductorCopper bare, solid
InsulationPVC according to VDE 0207
Sheath colourlight blue according to VDE 0293-308
Cross section1,5 mm²
The wiring cable H07V-U 1.5 HBL from VDE-Kabel is a PVC-insulated single-core cable with a cross-section of 1.5 mm² and a light blue sheath colour, defined according to VDE 0293-308. It is designed for use in electrical installations, particularly for installation in conduits, on, in, and under plaster, as well as in closed installation channels. The cable is also suitable for internal wiring of devices, control panels, and distributors, as well as for protected installations in and on luminaires. The application is intended for dry rooms and at a rated voltage of 450/750 V. The cable must not be installed directly on trays, troughs, or channels.

Applications

The cable is intended for use in electrical installations in buildings, particularly in areas where installation is carried out in enclosed conduits or channels. It is suitable for wiring control panels, distributors, and electrical devices. Use in luminaires is permitted, provided the installation is protected. The cable is not intended for direct installation on open routes such as trays or channels.

Functions and Equipment in Detail

The cable consists of a bare, single-strand copper conductor, which is surrounded by PVC insulation according to VDE 0207. The sheath colour is light blue, in accordance with VDE 0293-308 colour standards, enabling easy identification within the installation network. The cable is designed for a maximum operating temperature of +70 °C, with installation permitted at temperatures between +5 °C and +70 °C. After installation, the cable can be operated at temperatures from -30 °C to +70 °C.

Technology Explained Simply

The rated voltage of 450/750 V defines the maximum voltage the cable can safely transmit. The test voltage of 2500 V serves as a safety test to verify insulation strength. The minimum bending radius is 15 times the cable diameter, allowing safe bending without damaging the conductor. Flame retardancy according to VDE 0472 Part 804, Test Method B (equivalent to IEC 332-1), ensures that the cable does not contribute to rapid flame spread in case of fire. Thus, the cable is suitable for use in buildings where limited flame spread is required.

Compatibility and Accessories

The cable is designed for use in standard installation systems and can be connected to common installation components such as cable lugs, connectors, and distributors. Use in control panels and distributors is standard. The cable is not intended for use in damp or wet areas, as no specific protection rating such as IP67 is specified. Installation is carried out in enclosed channels, conduits, or under plaster, providing mechanical and environmental protection.

Installation and Mounting

Installation is carried out in enclosed conduits, channels, or under plaster. The cable must be installed at temperatures between +5 °C and +70 °C. After installation, the cable can be operated at temperatures from -30 °C to +70 °C. The minimum bending radius is 15 times the cable diameter, which must be considered during bending to avoid damage. The cable is not intended for direct installation on open routes such as trays or channels.

Advantages in Operation

The cable offers high mechanical stability due to the single-strand copper conductor and PVC insulation. The light blue colour facilitates identification within the installation network. Flame retardancy according to VDE 0472 Part 804, Test Method B, ensures limited flame spread in case of fire. The cable is designed for a maximum operating temperature of +70 °C, enabling safe use in typical indoor environments. Installation in enclosed channels provides additional protection against mechanical stress and environmental influences.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/480929
qrcode für VDE-Kabel H07V-U 1,5 Cable light blue