VDE-Kabel H07V-U1,5GNGE-R100, EAN: 4013728023868

VDE-Kabel H07V-U 1,5 GN/GE Cable green/yellow

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-U / R

VDE-Kabel H07V-U 1,5 GN/GE Cable green/yellow

Lieske Part No. 364565
Mfg Part No H07V-U1,5GNGE-R100
EAN-Code 4013728023868
Manufacturer VDE-Kabel
Here only 26,37 EUR
31,38 EUR incl. VAT

Further information for VDE-Kabel H07V-U 1,5 GN/GE Cable green/yellow

General
Nominal voltage450/750 V
Test voltage2500 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter
Flame retardancyVDE 0472 T. 804 test type B (=IEC 332-1)
ConductorCopper bare, solid
InsulationPVC according to VDE 0207
Sheath colouraccording to VDE 0293-308
The cable H07V-U 1.5 GN/GE from VDE-Kabel is a PVC-insulated single-core cable for use in electrical installations. It is intended for wiring in indoor spaces and is suitable for installation in conduits, on, in, and under plaster, as well as in closed installation channels. The cable is also suitable for internal wiring of devices, control panels, distributors, and for protected installation in and on lighting fixtures. It is not intended for direct installation on trays, troughs, or channels.

Wiring cable for stationary use in dry rooms is employed due to its construction and compliance with standards. The cable features a bare, single-strand copper conductor, ensuring a stable electrical connection. The insulation is made of PVC, manufactured according to VDE 0207, providing sufficient electrical insulation and mechanical stability. The sheath color conforms to standard VDE 0293-308, identifying the cable as a protective conductor (earth).

Technical specifications include a rated voltage of 450/750 V, enabling use in standard electrical systems up to this voltage. The test voltage is 2500 V, confirming the electrical strength of the insulation under test conditions. The maximum operating temperature is +70 °C, with the cable required to withstand temperatures from +5 °C to +70 °C during installation. After installation, it can be exposed to temperatures from -30 °C to +70 °C, allowing use in rooms with seasonal temperature fluctuations. The minimum bending radius is 15 times the cable diameter, which must be considered during installation to avoid damaging the cable.

Flame retardancy is tested according to VDE 0472 Part 804, Test Method B (equivalent to IEC 332-1). This means the cable does not produce flame propagation during a fire test under specified conditions, which is important for safety in electrical installations. Thus, the cable is suitable for use in buildings where limited flame spread is required.

Compatibility and application is in conjunction with other installation components such as conduits, installation shafts, or distributors. The cable is designed for use in electrical systems executed according to VDE 0281-3 (equivalent to H07V-U). The green-yellow color coding identifies it as a protective conductor, used for grounding devices and systems. The cable is not intended for use in damp or wet areas, as no specific weather resistance or watertightness is specified.

Installation and mounting require adherence to prescribed bending radii and temperature limits. The cable is not intended for direct installation on open supports such as trays or troughs, but must be installed in closed channels or conduits. Installation is typically carried out by qualified electricians who comply with the regulations of electrical standards (e.g., VDE 0100).

Operational advantages include the reliability and standard compliance of the cable. The use of a bare, single-strand copper conductor ensures high electrical conductivity and mechanical stability. The PVC insulation provides sufficient protection against electrical breakdown and mechanical stress. The green-yellow color coding facilitates identification as a protective conductor, which is beneficial during maintenance and repair work. The cable is designed for stationary use in indoor environments and meets the requirements for safety and functionality in electrical installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/364565
qrcode für VDE-Kabel H07V-U 1,5 GN/GE Cable green/yellow