Application
For connecting equipment subject to very extreme loads, both mechanically and thermally. For example, for equipment in agricultural, commercial and fire-prone premises. They are also used for large cooking kettles, hotplates, hand lamps, power tools such as circular saws, drills, DIY equipment, but also for portable engines or machines on building sites or in agricultural operations, etc. Can also be used for permanent installation, e.g. on plaster, in temporary buildings and living quarters, permitted for direct installation on components of lifting gear, machines, etc.
Construction
Conductor: Fine-wire copper wire class 5
Core insulation: Rubber compound in accordance with
VDE 0207 T. 20
Core identification: in accordance with VDE 0293-308
Outer sheath: Rubber compound in accordance with
VDE 0207 T. 21
Sheath color: black
Note
G = with green-yellow protective conductor
X = without protective conductor
Technical data
Nominal voltage: 450/750 V
Test voltage: 2500 V
Temperature range: -25 °C - +80 °C (when laying)
-25 °C - +80 °C (after laying)
Operating temp.: +80 °C (max.)
Bending radius: 6 x cable diameter (min.)
Continuous tensile load: max. 15 N/mm^2 taking into account the
total copper cross-section
Fire behavior: according to VDE 0472 T. 804
test type B (=IEC 332-1)
Oil resistance
of the sheath: according to VDE 0472 T. 803
test type A
Ozone resistance: according to VDE 0472 T. 805 test type A or
according to VDE 0472 T. 805 A1 test type C.