Application
As an installation cable, data, control and
connection cable in telecommunications and information systems as well as in trade fair control and regulation technology, for interference-free data and signal
transmission. Suitable for permanent installation in dry and damp rooms, outdoors but not without UV protection and not in the ground.
Construction
Conductor: bare copper wire, 7-wire
Core insulation: polyvinyl chloride (PVC)
Core identification: different colors, according to VDE 0815
Stranding: pairs in bundle stranding
Filling element: aluminum-coated foil
with drain wire underneath
Outer jacket: PVC
Technical data
Conductor resistance: max. 73.6 Ohm/km
Temperature range: moving -5°C to +50°C
stationary -40°C to +70°C
Peak operating voltage: max. 600 V (not for high-current installation purposes)
Test voltage: core/core 2000 V
core/shield 1000 V
Installation resistance: core/core min. 100 MOhm x km
core/shield min. 100 MOhm x km
Operating capacity: at 800 Hz max. 120 nF/km
(for cables with up to 4 double cores, 20%
exceedance of the values possible)
Characteristic impedance: at 1 kHz approx. 370 Ohm
at 10 kHz approx. 130 Ohm
Capacitive coupling: at 800 Hz max. 200 pF/100 m
(20% of the values, but at least one
value, may be up to 400 pF)
Line attenuation: at 1 kHz approx. 1.2 dB/km
at 10 kHz approx. 3.0 dB/km
Crosstalk attenuation: at 10 kHz and 500 m line length min. 60 dB
Minimum bending radius: approx. 7.5 x line diameter
Flame retardancy: VDE 0482-332-1-2/IEC 60332-1.