Sheathed cables NYM-J to VDE 25 Part 2 of 4 Application: For installations in the home, in industry, in the open, in dry and wet areas, on, in and under plaster, in masonry and in concrete (except vibrated or stamped concrete). For outdoor use, the cable must be protected from direct sunlight. Construction: Conductor: stranded bare copper -
mm ² single wire>
sqmm stranded Insulation: PVC according to VDE 2 7 d 4 Marking: according to VDE 293 filling compound Sheath: PVC gray Technical data: Rated voltage: 3/5 V Test voltage: 2 V Temperature range: +5 ° C and +7 ° C (when laying ) -4 ° C and +7 ° C (after installation) Operating Temp. +7 ° C (max.) Bending radius: 4 x cable diameter (fixed installation) * VDE leaning cable NYM-J to VDE 25 Part 2 of 4 Application: For installations in the home, in industry, in the open, in dry and wet areas, on, in and under plaster, in masonry and in concrete (except vibrated or compressed concrete). For external application, the line must be protected from direct sunlight are the. Construction: Conductor: stranded bare copper -
mm ² single wire>
sqmm stranded Insulation: PVC according to VDE 2 7 d 4 Marking: according to VDE 293 filling compound Sheath: PVC gray Technical data: Rated voltage: 3/5 V Test voltage: 2 V Temperature range: +5 ° C and +7 ° C (during installation) - 4 ° C and +7 ° C (after installation) Operating temperature: +7 ° C (max) Bend Radius:. 4 x cable diameter (fixed installation) * VDE - based cores x cross-section mm ²: 5 x 4, TR (kg /% m): 4
, Outer diameter approx:
4.9 Cu index (kg / m%):
9.2 Type: NYM-J 5X4 TR item:
MTR