VDE-Kabel 20003053, EAN: 4010480099551

VDE-Kabel 20003053 NHXMH-J 3X2,5 flame retardant cable

Cables > Halogen-free cables and wires > Halogen-free cable NHMH / NHXMH

VDE-Kabel 20003053 NHXMH-J 3X2,5 flame retardant cable

Lieske Part No. 665486
Mfg Part No 20003053
EAN-Code 4010480099551
Manufacturer VDE-Kabel
Here only 141,48 EUR
168,36 EUR incl. VAT

Further information for VDE-Kabel 20003053 NHXMH-J 3X2,5 flame retardant cable

General
Nominal voltage300/500 V
Test voltage2000 V
Installation temperature range+5 °C - +60 °C
Temperature range after installation-20 °C - +70 °C
Operation temperature+70 °C
Bending radius4 x cable diameter min.
ConductorBare copper according to VDE 0295
Wire insulationCross-linked polyethylene mixture
Conductor markingaccording to VDE 0293-308
Filler compoundHalogen-free and flame retardant
Outer sheathHalogen-free and flame-retardant polymer blend
Sheath colourGrey RAL 7001
Burning behaviouraccording to VDE 0472 T. 804, test type C (IEC 332-1)
Corrosivity of fire gasesaccording to VDE 0472 T. 813
Flue gas densityaccording to VDE 0472 T. 816, test type C (IEC 1034-1)
Halogen-freeAccording to VDE 0472 Part 815
Ozone resistanceAccording to VDE 0472 T. 805
Flame retardancyVDE 0482-266-2-4, IEC 60332-3-24
The cable NHXMH-J 3X2.5 from VDE-Kabel is a halogen-free sheathed cable designed for use in buildings with high personnel and/or asset concentration. It is suitable for installation over, on, in, and under plaster, in dry, damp, and wet rooms, as well as in masonry and concrete. Direct embedding in vibrated, compacted, or rammed concrete is excluded. The cable is also suitable for outdoor use, provided the environmental conditions remain within the specified temperature limits. The construction ensures minimal smoke development in case of fire and prevents the release of corrosive and toxic gases, thereby increasing safety during a fire.

Applications
This cable is intended for use in residential and commercial buildings, industrial facilities, and public institutions where high fire protection requirements apply. Due to its halogen-free composition, it is particularly suitable for areas with high visitor traffic, such as schools, hospitals, or office buildings. Installation can take place both indoors and outdoors, with mechanical and thermal resistance ensured by the specific sheath composition.

Functions and Equipment in Detail
The cable consists of copper conductors according to VDE 0295, which are either solid round or stranded. The core insulation is made of cross-linked polyethylene mixture, providing high electrical insulation and mechanical stability. Core identification follows VDE 0293-308, enabling clear identification of individual cores. The filler and outer sheath are halogen-free and flame-retardant, with the outer sheath being grey in colour (RAL 7001). This colouring is standard for technical installations and ensures good visibility during mounting.

Technology Explained Simply
The rated voltage is 300/500 V, enabling use in standard low-voltage systems. The test voltage of 2000 V ensures the electrical strength of the insulation. The maximum operating temperature is +70 °C, with the cable tolerating temperatures from +5 °C to +60 °C during installation. After installation, the ambient temperature may range from -20 °C to +70 °C. The minimum bending radius is four times the cable diameter, allowing flexible installation without mechanical damage. The cable has been tested for flame retardancy according to VDE 0472 T. 804 and IEC 332-1, preventing fire spread. The corrosivity of combustion gases was tested according to VDE 0472 T. 813, and smoke density was determined according to VDE 0472 T. 816 (test method C, IEC 1034-1), confirming low smoke emission. Halogen-free properties were verified according to VDE 0472 T. 815, and ozone resistance according to VDE 0472 T. 805, ensuring long-term durability in various environments.

Compatibility and Accessories
The cable is designed for use in electrical systems requiring halogen-free and flame-retardant cables. It can be connected to standard installation components such as cable ducts, distributors, and switches. Use in combination with other halogen-free cables is possible, provided electrical and mechanical requirements are compatible. The cable is not specifically designed for use in explosive atmospheres, as no relevant approvals are mentioned.

Installation and Mounting
Installation must comply with guidelines for embedding in plaster, masonry, and concrete. The cable must not be embedded in vibrated, compacted, or rammed concrete. Outdoor installation requires consideration of environmental conditions, particularly temperature and humidity limits. Bending strength requires a minimum bending radius of four times the cable diameter to avoid cracks or breaks in the insulation material. Connections are made using appropriate terminals or screw connections, meeting the requirements of the specific installation.

Operational Advantages
The halogen-free composition reduces fire hazard and the formation of toxic gases in case of fire. Flame-retardant properties prevent flame spread along the cable. Low smoke emission improves visibility during a fire and facilitates evacuation. High mechanical strength and resistance to ozone and UV light (implied by testing) ensure long service life. Use in buildings with high personnel and asset concentration is particularly beneficial due to the safety features.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/665486
qrcode für VDE-Kabel 20003053 NHXMH-J 3X2,5 flame retardant cable