Ubiquiti Wave-AP

Ubiquiti Wave-AP

Ubiquiti Wave-AP

Lieske Part No.2028041
Mfg Part NoWave-AP
EAN-Code
Manufacturer Ubiquiti
Here only 449,90 EUR
535,38 EUR incl. VAT

Further information for Ubiquiti Wave-AP

60GHz PtMP access point with Wave technology. 60 GHz 5.4 Gbps max throughput (2.7 Gbps duplex) Main radio
30° sector coverage
Weatherproof backup radio with 5 GHz and more than 800 Mbps
(1) 2.5 GbE and (1 ) 10G SFP+ WAN ports
Capacity for 15 clients:
— Wave Pro (8 km connection range)
— Wave Long-Range (8 km connection range)
— Wave Nano (5 km connection range)
Integrated GPS and Bluetooth
Technical specifications Mechanical Dimensions 212 x 205 x 187 mm (8.3 x 8.1 x 18,8 cm ( 7,4 inch )) Weight 2.3 kg (5.07 pounds) Housing materials Aluminum alloy, UV-stabilized polycarbonate Pole mount diameter 25 to 76 mm (1 to 7,6 cm ( 3 inch )) on the tube outside diameter Wind load 98 N at 200 km/h (22 lbf at 125 mph) Weatherproof IPX6 Hardware Processor Quad-core ARM® Cortex®-A53 with 1.4 GHz Memory DDR3L 512 MB Network interface (1) 2.5 GbE RJ45 port (100/1000/2500)*
(1) 10G SFP+ port (1/10)
* Only active when the SFP+ port is down. Max. Energy Consumption 24W Power Method Passive PoE 4-pair (1, 2+ 3, 6-) (4, 5+ 7, 8-)
Passive PoE 2-pair (4, 5+ 7, 8-), only for 44-54V DC Power supply 48V DC, 0.65A 2.5GbE PoE adapter (included) Supported voltage range 44-54V DC
22-27V DC GPS Yes Button Factory reset LEDs Power, Ethernet, GPS Operating temperature -40 to 60 °C (-40 to 140 °F) Operating humidity 5 to 95% non-condensing Certifications FCC, IC, CE Software Operating mode PtMP access point Ubiquiti-specific functions Wave technology Services UISP, Ping watchdog, NTP client, SNMP tools Antenna Alignment, Discovery Utility, Ping, Route Tracking, Speed Test Network Bridge Mode Application Requirements UISP: Version 1.5.7 and above System Total Throughput 5.4 Gbps (2.7 Gbps Duplex) Supported Clients Count 15 Max Range Connect to a Wave Pro: up to 8 km
Connection to a Wave Long-Range: up to 8 km
Connection to a Wave Nano: up to 5 km Encryption WPA2-PSK (AES) RF Working frequency* 57-71 GHz
*Depending on regulatory region. Channel bandwidth 2160, 1080 MHz Operating channels* 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz
*Depending on the regulatory region. Modulation 16QAM, QPSK Antenna Gain 24 dBi Polarization Vertical Linear Beam Width Azimuth: 3 dB 30°
Elevation: 3 dB 3° Electrical Down Tilt 0° Backup RF WiFi Standard 802.11ax (WiFi 6) Operating Frequency*
USA/CA
Worldwide
U-NII-1 5150-5250MHz
U-NII-2A 5250-5350 MHz
U-NII-2C 5470-5725 MHz
U-NII-3 5725-5850 MHz
5150-5875 MHz
*Depending on regulatory region. Channel bandwidth 20, 40, 80 MHz modulation BPSK (1/2), QPSK (1/2), QPSK (3/4), 16QAM (1/2), 16QAM (3/4), 64QAM (2/3), 64QAM (3/4), 64QAM (5/6), 256QAM (3/4), 256QAM (5/6), 1024QAM (3/4), 1024QAM (5/6) Antenna gain 12 dBi Cross-pole isolation 10 dB Polarization Dual-linear Beamwidth Azimuth: 3 dB 35°
Elevation: 3 dB 60° Electrical downward tilt 0° LEDs Power White flashing: Startup in progress.
White: no connection to the UISP application.
Blue: Connection to UISP application.
Flashing blue: Localization in progress.
Blue/white: Firmware update in progress Ethernet Flashing white: Ethernet traffic detected.
Flashing Blue: SFP+ traffic detected GPS Blue: Receiving at least (4) GPS satellite signals
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

http://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2028041
qrcode für Ubiquiti Wave-AP