Further information for Ubiquiti UAP-AC-SHD-5
UniFi Wave 2 802.11ac UniFi High-Density, 4x4 MU-MIMO Access Point 5-Pack without POE Injector Dimensions: 220 x 220 x 48.1 mm (8.66 x 8.66 x 4,8 cm ( 1,9 inch )) Weight: 700 g (1.54 lb) Networking Interface: (2) 10/100/1000 Ethernet Ports (Can be Aggregated) Port: (1) USB 3C Port Buttons: Reset Power Method: - Passive Power over Ethernet (48V), 802.3at Supported (Supported Voltage Range: 44 to 57VDC) Injector not included Power Supply: 48V, 0.5A PoE Gigabit Adapter* Power Save: Supported Maximum Power Consumption: 17W Maximum TX Power: 2.4 GHz - 25 dBm 5 GHz - 25 dBm Antennas: 2.4 GHz - (2) Antennas, 3 dBi each 5 GHz - (2) Antennas, 4 dBi each Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2 Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES ) BSSID: Up to Four per Radio Mounting: Wall/Pole/Fast-Mount (Kits Included) Operating Temperature: -30 to 70° C (-22 to 158° F) Operating Humidity: 5 to 95% Noncondensing Certifications: CE, FCC, ICAvailable probably from May 2017 Further information will be provided later! Wave 2 802.11ac UniFi High-Density, 4x4 MU-MIMO Access Point with dedicated Security radio and BLE to support intrusion detection/prevention, realtime airtime analysis and performance optimization, continuous spectrum monitor & channel adjustment + client location estimation & tracking Dimensions: 220 x 220 x 48.1 mm (8.66 x 8.66 x 4,8 cm ( 1,9 inch )) Weight: 700 g (1.54 lb) Networking Interface: (2) 10/100/1000 Ethernet Ports (Can be Aggregated) Port: (1) USB 3C Port Buttons: Reset Power Method: - Passive Power over Ethernet (48V), 802.3at Supported (Supported Voltage Range: 44 to 57VDC) Power Supply: 48V, 0.5A PoE Gigabit Adapter* Power Save: Supported Maximum Power Consumption: 17W Maximum TX Power: 2.4 GHz - 25 dBm 5 GHz - 25 dBm Antennas: 2.4 GHz - (2) Antennas, 3 dBi each 5 GHz - (2) Antennas, 4 dBi each Wi-Fi Standards: 802.11 a/b/g/n/ac/ac- wave2 Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) BSSID: Up to Four per Radio Mounting: Wall/Pole/Fast-Mount (Kits Included) Operating Temperature: -30 to 70° C (-22 to 158° F) Operating Humidity: 5 to 95% Noncondensing Certifications: CE, FCC, IC