Indoor/outdoor intercom terminal for managing access requests for residential and commercial buildings. Unlock with an NFC card, the UniFi Identity mobile app, a PIN code or a QR code
Directory and doorbell to request entry
Pairs with multiple UniFi Intercom viewers for remote access control
Connects to the UniFi Access Hub series via PoE
Weatherproof (exposed outdoors -30 to 60 °C) Technical specifications Mechanical Dimensions 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 2,8 cm ( 1,1 inch )) Weight device: 965 g (2.1 lb)
Bracket: 445 g (1 lb) Housing material Aluminum alloy, UV stabilized polycarbonate, glass Mounting material Powder coated stainless steel Mounting Wall bracket, gooseneck base adapter (included)
Surface mount bracket, flush mount (optional)
Sun protection kit (optional) Weatherproof IP65 Hardware Network interface (1) GbE RJ45 port Connectivity Bluetooth 4.2
NFC Power method PoE Supported voltage range 48V DC Max. power consumption 13W ESD/EMP protection Air: ±15kV, Contact: ±8kV Sensors Proximity sensor
ALS sensor Camera 3264 x 2448, 8 MP
H: 79.4°, V: 97.5°, T: 118.2° Display 177 mm (17,8 cm ( 7 inch )) Diagonal resolution 1024 x 600 (16:9) Display luminance Max. 1000 nits (typical) Touchscreen technology Multi-touch capacitive microphone Yes Speaker (1) 4 ohm, 2W LEDs (1) LCM low temperature indicator: orange (LCM turns off when the temperature is below -25°C, but the system works normally)
(1) LED floodlight
( 13) LED backlight of the keyboard Button (1) Factory reset NFC frequency 13.56 MHz NFC reading range NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC tag 1,2,3,4,5
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE DESFire Ambient temperature during operation Device: -30 to 60 °C (-22 to 140 °F)
Display:* -25 to 60 °C (-13 to 140 °F)
*The display turns off when the ambient temperature There is a temperature above/below the display operation, but other functions remain functional. (Valid after firmware version 1.0.66) Operating ambient humidity 5 to 90% non-condensing Certifications CE, FCC, IC Software management application UniFi Access: Version 1.22.17 and higher