Ceiling mounted WiFi 6 AP with 6 spatial streams for large offices. WiFi 6 Dual radio
6 spatial streams
140 m² (1,500 ft²) coverage
Over 350 connected devices
Powered via PoE
GbE uplink Technical specifications Mechanical Dimensions Ø197 x 35 mm (Ø7.76 x 3,5 cm ( 1,4 inch )) Weight Without bracket: 460 g ( 1.01 lb)
With bracket: 600 g (1.32 lb) Housing material Polycarbonate Mounting material Stainless steel (SUS304) Weatherproof IP54 Hardware Network interface (1) GbE RJ45 port Management interface Ethernet
-Bluetooth Power method PoE power supply UniFi PoE switch
PoE adapter (not included) Supported voltage range 44-57V DC Max. power consumption 13W Max. transmit power
2.4GHz
5GHz
22dBm
26dBm MIMO
2.4GHz
5GHz
2 x 2 (UL MU-MIMO)
4 x 4 ( DL/UL MU-MIMO) Throughput rate
2.4 GHz
5 GHz
573.5 Mbit/s
4.8 Gbit/s Antenna gain
2.4 GHz
5 GHz
4 dBi
6 dBi LEDs White Blue Button factory reset Wall/ceiling installation (included included) Operating temperature -30 to 60 °C (-22 to 140 °F) Operating humidity 5 to 95% non-condensing Certifications CE, FCC, IC Software WLAN standards 802.11a/b/g
WiFi 4/WiFi 5/WiFi 6 Security wireless connections WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS rate limiting per user Guest traffic isolation Supported Concurrent clients 350+ No latency DFS Yes*
*Supported with upcoming firmware versions Supported Data rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11b 1, 2, 5.5, 11 Mbit/s 802.11g 6, 9, 12, 18, 24, 36, 48 , 54 Mbit/s 802.11n (WiFi 4) 6.5 Mbit/s to 600 Mbit/s (MCS0 – MCS31, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbit/s to 3.4 Gbit/ s (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbit/s to 4.8 Gbit/s (MCS0 - MCS11 NSS1/2/3 /4, HE 20/40/80/160) Application requirements UniFi network version 6.1.56 and higher