Ubiquiti Unifi Access Point Mesh / Indoor-Outdoor / WiFi 6 Mesh 4x4 Access Point / U6-Mesh
Indoor/Outdoor, 4x4 WiFi 6 Access Point for Mesh Applications.
The Access Point WiFi 6 Mesh (U6 Mesh) is a high-performance, four-stream WiFi 6 access point that provides premium signal meshing to improve wireless coverage of home and enterprise networks. The U6 Mesh achieves a total throughput rate of up to 5.3 Gbit/s in the 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MIMO) bands. This access point also operates with full 4x4 MIMO with 160 MHz channels to create high capacity wireless uplinks and enable faster data transfer. The elegant U6 Mesh is so discreet that it can be placed anywhere in your home or office, but also so robust that it works reliably outdoors thanks to its waterproof housing with protection class IPX5. The U6 Mesh is a plug-and-play device that allows you to easily extend your WiFi signal to ensure complete, seamless coverage and high-quality WiFi connectivity. It can be set up in minutes and fully managed using the UniFi Network web application or mobile app.
Features:

• Highly efficient 4x4 WiFi 6 (802.11ax)
• 5 GHz (4x4 MU-MIMO and OFDMA) band with a throughput rate of 4.8 Gbps
• 2.4 GHz band (2x2 MIMO) with a throughput rate of 573.5
• Works with full 4x4 MIMO with 160 MHz bandwidth
• Powered via 802.3af PoE (PoE adapter included)
Technical specifications Mechanical Dimensions Ø48.5 x 159.5 mm (Ø1.9 x 16 cm ( 6,3 inch )) Weight 400 g ( 0.88 lbs) Housing Material Plastic, Aluminum Mount Materials Plastic Weatherproof IPX5 Hardware Network Interface (1) GbE RJ45 Port Management Interfaces Ethernet
-Bluetooth Power Method PoE Power Supply UniFi PoE Switch
48V, 0.32A PoE Adapter (included ) Supported voltage range 44-57 V DC Max. power consumption 11.4 W Max. transmit power
2.4 GHz
5 GHz
22 dBm
26 dBm MIMO
2.4 GHz
5 GHz
2 x 2 (UL MU-MIMO)
4 x 4 (DL/ UL MU-MIMO) Throughput rate
2.4 GHz
5 GHz
573.5 Mbit/s
4.8 Gbit/s Antenna gain
2.4 GHz
5 GHz
3 dBi
5 dBi LEDs White Blue Button Factory reset Mounting Wall, table, pole mounting ( included)
Ceiling mount (optional) Operating temperature -30 to 60°C (-22 to 140°F) Operating humidity 5 to 95% non-condensing Certifications CE, FCC, IC Software WLAN standards 802.11a/b/g
WiFi 4/WiFi 5/WiFi 6 Wireless Security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS rate limiting per user Guest traffic isolation Supported Concurrent clients 300+ No latency DFS Yes*
*Will be available with upcoming firmware releases supported Supported data rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11b 1, 2, 5.5, 11 Mbit/s 802.11g 6, 9, 12, 18, 24, 36 , 48, 54 Mbit/s 802.11n (WiFi 4) 6.5 Mbit/s to 600 Mbit/s (MCS0 – MCS31, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbit/s to 3.4 Gbit/s (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbit/s to 4.8 Gbit/s (MCS0 - MCS11 NSS1/2 /3/4, HE 20/40/80/160) Application requirements UniFi network version 6.2.51 and higher