Further information for Triton RXA-09-AS4-BAX-A1 Wall Mount Cabinet 9HE black
Technical data
Door height
412mm
Length packaging
0.400m
Width
550mm
Colour
Black (RAL9005)
Weight
16.910kg
Height packaging
0.463m
Recommended maximum load
25kg
Width packaging
0.550m
Packaging volume
0.1019m³
Protection class
IP30
Height (outside)
463mm
Depth
400mm
Height unit
9U
Door width
505mm
Detachable rear panel
Demountable
Detachable side panels
The Triton RXA-09-AS4-BAX-A1 is a 48,3 cm ( 19 inch ) wall-mounted enclosure in 9 U format, designed for use in office environments. It is a single-piece, disassembled enclosure delivered in flat-pack format, thereby reducing transport and storage costs. The enclosure is mounted directly to the wall and is intended for the installation of data and telecommunication systems as well as their distribution systems. Dimensions are 550 mm width, 463 mm height, and 400 mm depth. The maximum installation depth is 300 mm. The enclosure is made of sheet steel and is painted black (RAL 9005).
Applications
This wall-mounted enclosure is designed for indoor use, particularly in offices or technical rooms. It is not suitable for outdoor use or environments with explosion hazards, moisture, or dampness. Use is subject to the condition that the device is protected against mechanical damage, improper handling, and unintended use. The recommended maximum load is 25 kg, which must be evenly distributed and the enclosure must be mounted on a load-bearing wall (e.g. brick or concrete wall).
Functions and Equipment in Detail
The enclosure features a 4 mm thick safety glass door with a bronze finish, equipped with a locking system and can be mounted to open either right- or left-handed. The doors are designed for a maximum load of 10 kg. Inside, two vertically adjustable mounting rails are integrated, enabling flexible device installation. The rear panel and side panels are removable, facilitating access to installed components. The enclosure construction consists of individual parts connected via plastic connectors, allowing assembly within approximately 5 to 10 minutes. Assembly requires almost no tools; only a Torx screwdriver (T25) is necessary.
Technology Explained Simply
The enclosure is equipped with an earthing connection that must remain properly secured and inserted throughout the entire service life. An M8 screw located at the bottom of the enclosure serves as the main earthing point. The construction is designed for passive ventilation, with integrated ventilation slots. For cable routing, three openings are available: top, bottom, and rear on the back panel, each with removable covers. The minimum coating thickness is 65 micrometers, ensuring high-quality surface coating. The protection class IP30 provides protection against solid foreign objects and splashing water, but not against dust or prolonged water exposure.
Compatibility and Accessories
The enclosure is compatible with various accessories suitable for expanding or optimizing the installation. These include mounting kits with screws and cage nuts, intermediate shelves in various depths (150 mm, 250 mm), cable ties, and patch panels. Additional compatible products include UPS systems such as models CP1200EIPFCRM2U, CP1600EIPFCRM2U, and CP2000EIPFCRM2U, as well as building automation control centers for IP-based systems. Installation is performed using the screws, anchors, and washers included in the package. The spacing for wall mounting is indicated in the distribution diagram with the value "R".
Mounting and Installation
Mounting is done by securing the enclosure to the wall using the screws, anchors, and washers included in the delivery. The individual parts of the enclosure are connected via plastic connectors. Assembly time is approximately 5 to 10 minutes. Minimal tools are required; only a Torx screwdriver (T25) is necessary. The wall must have sufficient load-bearing capacity to safely support the recommended maximum load of 25 kg.
Operational Advantages
The disassembled design enables cost-efficient storage and transport logistics. Simple assembly and flexible adjustment of the mounting rails to different devices allow for quick and secure installation. The integrated earthing connection and protection class IP30 ensure a safe and reliable operating environment. Cable entries and ventilation slots support proper cable routing and passive cooling of installed components. The use of recyclable materials supports environmentally friendly disposal after the device is decommissioned.