Further information for Triton RUA-12-AS4-CAX-A1 19" wall enclosure 12HE light grey
Technical data
Colour
Grey (RAL7035)
Height (outside)
635mm
Width packaging
0.600m
Width
600mm
Door height
530mm
Packaging volume
0.1505m³
Protection class
IP30
Door width
530mm
Length packaging
0.395m
Recommended maximum load
30kg
Weight
20.800kg
Depth
395mm
Height packaging
0.635m
Height unit
12U
Detachable side panels
Demountable
Detachable rear panel
The Triton RUA-12-AS4-CAX-A1 is a single-piece 48,3 cm ( 19 inch ) wall cabinet with a height of 12 U, designed for use in office environments. The steel sheet housing has an external height of 635 mm, a width of 600 mm, and a depth of 395 mm. The colour is light grey (RAL 7035). It features a robust welded construction and is intended for the installation of data and telecommunication systems as well as their distribution systems. The maximum recommended load is 30 kg, with individual doors having a load capacity of up to 10 kg. The installation depth is limited to a maximum of 300 mm.
Applications
This wall cabinet is intended for indoor use, particularly in offices or technical rooms, where compact and secure mounting of IT and communication components is required. It is not suitable for outdoor use or for environments with explosion hazards, moisture, or dampness. The protection class IP30 provides protection against solid foreign objects and splashing water, but not against dust or prolonged water exposure. Installation is carried out directly onto a load-bearing wall, such as brick or concrete, using the screws, anchors, and washers included in the package.
Functions and Equipment in Detail
The housing features a 4 mm thick safety glass door with a bronze-coloured appearance, equipped with a locking system. The door can be mounted to swing either right or left and opens up to nearly 180°. The removable side panels allow direct access to installed components from the rear without having to remove them. The rear panel is also removable. Cable entries are located at the top, bottom, and rear of the housing, equipped with removable covers, enabling flexible cable routing. A brush set is included in the delivery to seal the cable entries against dust.
Technology Explained Simply
The vertical 48,3 cm ( 19 inch ) rack rails are depth-adjustable and can be positioned continuously within the cabinet depth, facilitating component installation and cable management. The housing features a total of six openings for fan cutouts in the top and bottom, enabling the installation of fans. This expands cooling options compared to conventional wall enclosures, which often do not allow active ventilation. The earthing connection is integrated into the housing; an M8 screw is located in the base as the main earthing point. All removable parts and the distribution frame are connected to earthing cables, which must remain properly secured throughout the entire service life.
Compatibility and Accessories
The cabinet is compatible with accessories from the RBA-6+RUA+RCA series, such as fan units with 1, 2, or 3 fans, which are expandable. Intermediate shelves in various depths (150 mm, 250 mm, 350 mm) are also available. Mounting kits with screws and cage nuts are available for device installation. Additionally, UPS systems such as models CP1200EIPFCRM2U, CP1600EIPFCRM2U, or CP2000EIPFCRM2U can be integrated into the housing. Building automation control centres for IP systems, such as the ALL3500v2 or ALL5000v2, are also compatible.
Installation and Mounting
Installation is carried out on a load-bearing wall using the mounting hardware included in the package. The spacing for hanging is indicated in the distribution diagram with the value "R". Load distribution must be even to ensure the recommended maximum load of 30 kg is not exceeded. The removable side and rear panels, as well as the adjustable rack rails, facilitate installation and maintenance.
Operational Advantages
The cabinet offers a compact, robust, and flexible solution for mounting IT and communication components on a wall. The removable side and rear panels, along with the depth-adjustable rack rails, enable easy installation and maintenance. The integrated fan cutouts expand cooling options, allowing the installation of high-performance components. The earthing connection and cable entries with brush set ensure a safe and dust-free installation. The protection class IP30 protects against solid foreign objects and splashing water, ensuring safe use in enclosed rooms.