*Order-related, cannot be canceled*, Description: Welded standing cabinet for a load of 1200kg, expandable up to 1500kg in sheet steel design, IP 20. Air slots on the side in the roof (ventilation dome) and base part. Covered cable ducts and mounting locations for ventilation units in the roof and floor sections. All parts grounded together, star point pre-assembled. Two pairs (three pairs from a cabinet depth of 900 mm) of 48,3 cm ( 19 inch ) vertical mounting rails, galvanized, adjustable. All height units marked on the mounting rails and numbered in opposite directions. In the accessory pack: 16 cage nuts with screws and washers, 4 leveling feet, brush strip set color: RAL 7035 - Light gray Width: 800 mm Depth: 1000 mm Height: 42 U (1970 mm) Front door: Glass door hinged on the left, opening angle 180° Closing of the front door: Multi-point locking with Ergoform handle and semi-cylindrical security lock, keyed alike Side wall on the right: Solid sheet metal, with two security locks Side wall on the left : Solid sheet metal, with two security locks Rear wall/rear door: Two-wing solid sheet metal door, opening angle 180° Closing of the rear door: Set for two-wing door - multi-point locking, Ergoform handle and semi-cylindrical lock with the same key. Variant: Standard