Technical data
Height packaging	0.570m
Length packaging	0.460m
Packaging volume	0.0813m³
Colour	Black (RAL9005)
Depth	460mm
Weight	14.010kg
Width packaging	0.310m

The RKA type combines a possibility to install both 10“ or 19“ equipment. A conversion from one standard to another is possible without replacement of a cabinet and cables.
DESCRIPTION, PURPOSE OF USE25,4 cm ( 10 inch )/48,3 cm ( 19 inch ) wall mounted cabinet with IP30 protection
Cabinet is to be hanged right on the wall
Cabinet includes adjustable frame for device installation
Cabinet construction: Compact welded cabinet / safety hardened glass door, thickness 4 mm. On demand may be metal or perforated
Max. permissible load of the door is 10 kg
Min. thickness of the surface finish is 65 micrometer
Cabinets are intended for installation of data and telecommunication devices and their distribution systems
All parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet
There is one M8 screw placed at the side wall of the cabinet as an earthing main point
Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet
OPERATION CONDITIONS
Operation environment:Office
The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
Must be protected against:
Mechanical damage
Improper manipulation
A different usage than the cabinet is intended for
Improper manipulation is especially:Overloading (maximum recommended load exceeding)
Device installation that can influence negatively operation and function of the cabinet or the installed equipment
INSTALLATION OF THE CABINET:This type of cabinet is to be hanged right on the wall using screws, wall plugs and washers. Spacing of mounting holes is indicated as „R“ in the cabinet scheme
To secure the maximum recommended load, it is necessary to fix the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
ENVIRONMENT PROTECTION:All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations
Supply includes: 2x key - front door, 4x screw 6x50mm, 4x washer 6,6mm, 4x dowel 10mm, 8x captive nut M6