* Order-related, non refundable *, Pre-assembled, 4xLochrasterprofil, Welded standing cabinet for load 400 kg, in sheet steel version, IP 54. Deluded cable penetrations in the roof and floor part. All parts zusammengeerdet. Star point preassembled, two pairs (from cabinet depth 900 mm three pair) 19 vertical mounting rails, galvanized, adjustable in pack: 16 St. cage nuts with screws and washers, 4 St leveling, brush strips set. Colour: RAL 7035 - light gray Width: 600 mmTiefe: 1200 mmHöhe : 42U (1970 mm) Front door: Glass door left stop, opening angle 180 ° closing the front door: multipoint closing with Ergoform handle and security lock sidewall right: solid sheet, bolted side wall left: solid sheet, screwed rear wall / rear door: screwed back wall • 19: backplane sheet metal, screwed closing the rear door -Standverteiler with IP 54 protection • Cabinet includes 4 (with distributors deeper than 800 mm, 6) adjustable vertikaleRasterschienen for installation of components • Cabinet construction: -. welded steel construction with removable Wänden- door glass: 4 mm safety glass, the door is equipped as standard in the sense of a perfect seal with a three-point closure. • These cabinets are intended for installation of data and telecommunication devices and ihrerVerteilersysteme. • The frame of the cabinet and all the removable parts (side and rear covers, doors ...) sindmit grounding cables connected, which must be attached and plugged in during the entire useful life of the Schrankesordnungsgemäß. • In the bottom of the distributor an M8 screw is as the main earthing point. • Cable entry with removable covers at the top and bottom.