* On order, no cancellation possible *, H925/B900/T540mm, RAL 7035 light gray, 1 SEKTIONDie 1 Section allows the installation of 19 components with a max. 6U of height and a depth of 450 mm. They are installed vertically, the "19 - rails are adjustable in the enclosure depth. Exploiting cable glands with cutout panels ends in the back wall, roof and floor. Cable between the individual sections can be performed by the central partition wall. 2 SECTION In the 2.Sektion a mounting width of 48,3 cm ( 19 inch ), a height of 12U and a depth of 450mm are available. The mounting rails are adjustable. Here the structured cabling as well as the active elements of the Fimennetzes are usually concentrated and the individual services are allocated to the recommended up to 48 jobs (each with 2 ports according to the standard). 3 SECTION The third section covers the entire surface of the bottom of the housing. Here is room for components with a maximum depth of 800 mm, a width of 19 and a height of 2 to 7U depending on housing type. Access to this section is through the door on the right. Beside the distributor must be allowed sufficient space for the extraction of components.