Transcend TS128GMSA230S, EAN: 0760557842583

Transcend TS128GMSA230S SSD mSATA 128GB

Computer-Components > Hard Drives > SSD MSATA

Transcend TS128GMSA230S SSD mSATA 128GB

Lieske Part No. 2114381
Mfg Part No TS128GMSA230S
EAN-Code 0760557842583
Manufacturer Transcend
Here only 75,13 EUR
89,40 EUR incl. VAT

Further information for Transcend TS128GMSA230S SSD mSATA 128GB

General
Capacity128 GB
Form factormSATA
InterfaceSATA 6Gb/s
NAND flash memory type3D-NAND (TLC)
Reading speed550 MBps
Write speed400 MBps
The Transcend SSD with manufacturer number TS128GMSA230S is an internal storage module in mSATA form factor, specifically designed for use in compact computers, notebooks or embedded systems. The device offers a storage capacity of 128 GB and uses 3D-NAND flash memory of type TLC, enabling a combination of high storage density and sufficient lifespan for typical office and home applications. The SSD features a SATA 6Gb/s interface, also known as SATA III, supporting high data transfer rates. The internal data throughput reaches up to 550 MBps for reading and 400 MBps for writing, ensuring fast system response and efficient file transfers.

Applications
This SSD is designed for systems requiring compact storage space, such as small form factor PCs, mini-notebooks, industrial controls or single-board computers. The mSATA standard enables a compact design that can be integrated into devices with limited space. Due to the SATA 6Gb/s interface, it is compatible with modern motherboards that support this interface. The use of 3D-NAND technology provides higher storage density compared to 2D-NAND, allowing more storage capacity in a smaller format.

Functions and Equipment in Detail
The device operates with 3D-NAND flash memory, where memory cells are arranged in multiple layers vertically, increasing storage density while reducing the physical size of the module. The memory type TLC (Triple-Level Cell) stores three bits per cell, resulting in higher capacity, although it has fewer write cycles per cell compared to MLC or SLC. Nevertheless, the lifespan is sufficient for use in non-critical applications such as office or home computers. The maximum read speed of 550 MBps and write speed of 400 MBps are at the upper end for mSATA SSDs, enabling fast system starts, application loading and file transfers.

Technology Explained Simply
The SATA 6Gb/s interface (also SATA III) provides a data transfer rate of up to 6 Gbit/s, which in practice corresponds to approximately 550 MB/s, depending on the hardware and software environment. The SSD uses 3D-NAND technology, where memory cells are stacked vertically to enable more storage capacity in a smaller format. This leads to more efficient use of component space and allows integration into small devices. The TLC technology stores three bits per memory cell, increasing capacity but reducing the number of possible write cycles per cell. For use in desktop or notebook systems, this is sufficient, as the load is typically not as high as in server or industrial environments.

Compatibility and Accessories
The SSD is designed for systems that support an mSATA connection. This includes many modern laptops, mini-PCs and embedded systems. The SATA 6Gb/s interface is backward compatible with SATA II (3 Gb/s) and SATA I (1.5 Gb/s), with the maximum speed adjusted to the respective interface.

Installation and Mounting
Installation is done by inserting the mSATA module into the corresponding slot on the motherboard. The connection is made via the SATA interface, with power supplied through the SATA connector. Mounting typically requires no additional tools, as the module is usually secured by a retention bracket or screw. The exact installation instructions depend on the specific hardware and can be found in the system's manual.

Operational Advantages
The SSD offers higher reliability compared to conventional hard drives (HDD) due to the absence of moving parts. This results in lower susceptibility to mechanical shocks and vibrations. The fast access times and high data transfer rates ensure quicker system response, shorter boot times and more efficient file operations. The combination of compact form factor and high performance makes the SSD particularly suitable for mobile and space-saving systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2114381
qrcode für Transcend TS128GMSA230S SSD mSATA 128GB