Theben 9080064, EAN: 4003468906415

Theben 9080064 iONprime PB 2R ABR 2-way toggle switch Alu brushed

Installation > Switch Material > Switch Flush standard

Theben 9080064 iONprime PB 2R ABR 2-way toggle switch Alu brushed

Lieske Part No. 890023
Mfg Part No 9080064
EAN-Code 4003468906415
Manufacturer Theben
Here only 94,05 EUR
111,92 EUR incl. VAT

Further information for Theben 9080064 iONprime PB 2R ABR 2-way toggle switch Alu brushed

General
Number of functions2
Surface finishBrushed Aluminium
CompatibilityiONprime PB KNX push-button sensor base unit
TechnologyKNX
Product typeRocker
The product is a 2-way toggle switch in brushed aluminium design, specifically developed for the iONprime PB KNX touch sensor base unit by Theben. It is an underfloor switchgear designed for integration into wall installations and serves as a control element for KNX-based building automation systems. The toggle switch enables the control of two different loads or functions via a single device, with mechanical operation performed through the toggle. The design is flat and flush to ensure a clean visual integration into the wall surface.

Switch Underfloor Standard
This product is designed as an underfloor switch, meaning it is installed into a pre-prepared wall opening, with the front plate flush with the wall surface. The use of brushed aluminium provides a modern, high-quality appearance that integrates well into contemporary interior designs. The surface is smooth and easy to clean, which is advantageous for use in residential and office buildings.

Functions and Equipment in Detail
The toggle switch is intended for use with the iONprime PB KNX touch sensor base unit. This base unit handles the electronic control and communication over the KNX network. The mechanical toggle serves as the control element that activates the electronic function. The 2-way configuration allows for independent control of two loads, for example, two different lighting circuits or a combination of lighting and blinds. The toggle switch is not functionally independent and requires connection to the touch sensor base unit, which provides the electronic logic and network integration.

Technology Explained Simply
The toggle switch itself is a purely mechanical control element without electronic components. Control is performed via the connected iONprime PB KNX touch sensor base unit, which communicates with other devices in the building via the KNX protocol. KNX is an open standard protocol for building automation, enabling central control of lighting, blinds, heating, and other functions. The toggle switch transmits the mechanical movement to the base unit, which then issues corresponding commands in the network. Communication takes place via the KNX bus system, which runs on a separate line.

Compatibility and Accessories
The toggle switch is exclusively compatible with the iONprime PB KNX touch sensor base unit by Theben. No other base unit or technology (such as DALI or 1-Wire) is supported. Use with other systems is not intended and not guaranteed. The toggle switch is intended as a replacement part or addition for existing installations, with the base unit already installed. There are no additional accessories specifically offered for this toggle switch.

Installation and Mounting
Installation is carried out in an underfloor installation system. The toggle switch is inserted into a suitable wall opening designed for the iONprime PB KNX base unit. The mechanical connection is made via the base unit, which is mounted in the wall box. The toggle switch is placed onto the base unit and locked, with no additional mounting elements required. Installation does not require special tools, although preparation of the wall opening and correct mounting of the base unit are prerequisites.

Advantages in Operation
The toggle switch offers clear, mechanical operation that remains available even during power failure or network disruptions. The optical design in brushed aluminium fits modern interior concepts and gives the installation a high-quality appearance. Integration into the KNX system enables flexible and central control of building functions, with the toggle switch serving as a user-friendly control element. The 2-way configuration allows control of multiple functions via a single device, simplifying operation and reducing the number of required switches.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/890023
qrcode für Theben 9080064 iONprime PB 2R ABR 2-way toggle switch Alu brushed