| General |
| Operating voltage | 230 V AC |
| Frequency | 50 - 60 Hz |
| Number of channels | 1 |
| Mounting method | Panel mounting/wall mounting |
| Connection type | Screw terminals |
| Program | Daily program |
| Autonomy | 3 days |
| Switching power at 250 V AC, cos φ = 1 | 10 A |
| Switching power at 250 V AC, cos φ = 0.6 | 2 A |
| Shortest switching time | 30, 12 min |
| Step accuracy at 25 °C | ≤ ± 1 s/day |
| Contact type | Change-over contact |
| Switching output | Potential-free and phase-independent |
| Stand-by power consumption | ~0,5 W |
| Test mark | EMV |
| Housing and insulation material | High-temperature resistant, self-extinguishing thermoplastics |
| Degree of protection | IP 20 |
| Protection class | II according to EN 60 730-1 |
| Ambient temperature | -10°C ... 55°C |
| Scope of delivery | 6 terminal blocks, tension clamp, socket |
The Theben SUL 189 hw is an analog,
quartz-controlled time switch designed for use in electrical installations. It enables time-based control of consumers such as lighting, heating, or ventilation. The device is designed for
front panel mounting or
wall mounting and features a
potential-free, phase-independent switching output, allowing flexible integration into existing circuits. The switching function is implemented via a
changeover switch, suitable for controlling loads up to 10 A at cos φ = 1. The clock is equipped with a
backup power reserve that maintains timekeeping for up to three days in the event of a power failure, preventing interruption of the program.
Applications
This time switch is suitable for use in residential and commercial buildings where automated, time-controlled switching is required for lighting, heating, or other electrical devices. The
daily and weekly programming allows individual control over 24 hours per day and across seven days of the week. The integrated
1/2-day OFF function on weekdays provides additional flexibility, for example, for controlling office lighting that should only be activated during the first or second half of the day. The
switching capacity of 10 A at cos φ = 1 and 2 A at cos φ = 0.6 makes the device suitable for a wide range of loads, including light bulbs and small electrical appliances.
Functions and Features in Detail
The SUL 189 hw features a
daily program that can be individually programmed for each day of the week. The
shortest switching time is 30 minutes, with a 12-hour switching time allocated for the 1/2-day OFF function. Programming is done in 15-minute increments, while the 1/2-day OFF function can be set in 12-minute steps. The
timekeeping accuracy is ≤ ±1 second per day at an ambient temperature of 25 °C, ensuring high time precision. The clock includes a
socket that allows mounting in standard front frames (72 x 72 mm). The package includes
6 plug pins, a
clamping bracket, and the
socket. The switching status indicator allows visual monitoring of the switching state.
Technology Explained Simply
The clock is powered by a
NiMH cell as a backup power reserve, which maintains timekeeping for up to three days during a power outage. The
quartz-controlled time base ensures high accuracy, which is crucial for the reliability of the switching function. The
potential-free switching output means the switching contact does not carry a fixed voltage, enabling flexible use in various circuits. The
phase-independent circuitry allows installation regardless of the phase position in the network, simplifying installation. The
screw terminals enable secure and reliable connections for cables.
Compatibility and Accessories
The time switch is designed for use in standard front frames with dimensions 72 x 72 mm. The accessory
Quick Mounting 72 x 72 (part number 9070071) can be used for faster installation. The clock includes a socket that fits into the front frames. Installation is done using the included clamping bracket. No additional accessories are included in the package, particularly no batteries or extra plug pins.
Installation and Mounting
Mounting is either in front panel installation or on the wall. The clock is inserted into a front frame measuring 72 x 72 mm, using the included socket and clamping bracket. Electrical connections are made via the screw terminals. Programming of switching times is done using plug pins and rotary segments. The clock is designed for ambient temperatures from -10 °C to +55 °C, allowing use in indoor environments under normal operating conditions.
Operational Advantages
The SUL 189 hw offers reliable, maintenance-free switching control with high time accuracy. The backup power reserve ensures the program is not lost during short-term power outages. Flexible programming and phase-independent circuitry simplify installation and adaptation to various requirements. The use of
high-temperature resistant, self-extinguishing thermoplastics for the enclosure and insulation materials ensures high safety and durability. The
protection rating IP 20 and
protection class II according to EN 60 730-1 guarantee safe operation indoors. The standby power consumption is approximately 0.5 W, indicating low energy consumption in standby mode.