Teltonika PPWS0000110

Teltonika PPWS0000110 OBD II Power Cable Female

Networks > Router > GSM/UMTS/LTE

Teltonika PPWS0000110 OBD II Power Cable Female

Lieske Part No. 1117863
Mfg Part No PPWS0000110
EAN-Code
Manufacturer Teltonika
Here only 5,06 EUR
6,02 EUR incl. VAT

Further information for Teltonika PPWS0000110 OBD II Power Cable Female

General
Cable typetwo-wire plug
Length tolerance±0,5 cm
Stripped length0,5 cm
Stripped length tolerance±0,1 cm
Voltage range10-30 V DC
CompatibilityFMB001, FMB010, FMC001, FMM001, FM3001
The Teltonika OBD II Power Cable Female is a two-wire connector, specifically developed for powering telematics devices in office or test environments. It is used for configuring and testing the devices FMB001, FMB010, FMC001, FMM001, and FM3001, which are normally operated in vehicles via the OBD-II interface. The cable enables simple and quick commissioning outside the vehicle, allowing the devices to be fully configured and tested before installation. The cable length is 23.5 cm, with a tolerance of ±0.5 cm. The stripped length at the end of the cable is 0.5 cm with a tolerance of ±0.1 cm, ensuring a secure connection to the devices.

Applications
This cable is primarily designed for use in workshops, service departments, or offices where devices are to be configured and tested before installation in a vehicle. It allows simulation of operating voltage in the range of 10 to 30 volts DC, typical for vehicle electrical systems. This enables functions such as communication, data transmission, and power supply of the devices to be tested in a laboratory environment without requiring the device to be mounted in a vehicle.

Functions and Features in Detail
The connector is two-pole and serves exclusively for power supply. It is not designed for data transmission or signal communication. The construction allows it to be directly connected to the corresponding connectors of the specified Teltonika devices. The length of 23.5 cm provides sufficient flexibility for placement on a workbench without being too short or too long. The stripped length of 0.5 cm ensures a secure and stable connection without requiring additional tools or modifications.

Technology Explained Simply
The cable transmits DC voltage in the range of 10 to 30 volts, matching the voltage range commonly found in vehicles. It is not designed for AC voltage or other voltage ranges. Use in an office environment allows devices to be tested under realistic conditions without requiring a vehicle to be available. The design is simple and robust to ensure reliable power supply during configuration. It is a purely passive cable without integrated electronics or additional functions.

Compatibility and Accessories
The cable is exclusively compatible with Teltonika devices FMB001, FMB010, FMC001, FMM001, and FM3001. It is not intended for use with other devices or systems. Use with other devices is not recommended and may cause damage. The devices for which this cable is intended are typically vehicle trackers or telematics modules operated via the OBD-II interface in vehicles. The cable itself is not a replacement for the OBD-II connection in the vehicle, but is intended solely for preparation and testing in a laboratory environment.

Installation and Mounting
Installation is performed by simply plugging the cable into the corresponding power connector of the Teltonika devices. No additional mounting or wiring is required. The connection is mechanically stable and can be made without tools. The cable length allows for flexible placement on a desk or workbench.

Operational Advantages
Using this cable allows device configuration to be completed before installation in the vehicle. This reduces installation time in the vehicle and enables early functional testing. Devices can be fully configured and tested in the office, reducing error rates during installation. The simple handling and direct connection without additional tools or adapters increase efficiency during device preparation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1117863
qrcode für Teltonika PPWS0000110 OBD II Power Cable Female