| General |
| Technology | LTE Cat 1/GSM/GPRS/GNSS/BLUETOOTH® LE |
| GNSS systems | GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS |
| Sensitivity | -165 dBm |
| Accuracy | < 3 m |
| Hot-start | < 1 s |
| Warm start | < 25 s |
| Cold-start | < 35 s |
| Cellular technology | LTE Cat 1, GSM |
| GSM bands | B2/B3/B5/B8 |
| 4G bands (FMC920-QJIB0) | B1/B3/B7/B8/B20/B28 |
| 4G bands (FMC920-QKIB0) | B2/B3/B4/B5/B7/B8/B28/B66 |
| Data transmission (LTE FDD) | Max 10Mbps (DL)/Max 5Mbps (UL) |
| Data transmission (LTE TDD) | Max 85.6 Mbps (DL)/Max 85.6 Mbps (UL) |
| Data transmission (GSM GPRS) | Max 85.6Kbps (DL)/Max 85.6Kbps (UL) |
| Data support | SMS (text/data) |
| Input voltage | 10 - 30 V DC |
| Backup battery | 170 mAh |
| Battery type | Li-Ion |
| Battery capacity | 0.63 Wh |
| Power consumption (Ultra Deep Sleep) | < 2 mA |
| Power consumption (Deep Sleep) | < 3 mA |
| Power consumption (Online sleep) | < 8 mA |
| Power consumption (GNSS sleep) | < 12 mA |
| Power consumption (Nominal) | < 28 mA |
| Bluetooth® specification | 4.0 + LE |
| Digital inputs | 1 |
| Digital outputs | 1 |
| Analogue inputs | 1 |
| USB interface | 2.0 Micro-USB |
| LED indicator | 2 status LEDs |
| SIM slot | Micro-SIM |
| Memory | 128MB internal flash memory |
| Operating temperature (with battery) | -20 to +40 °C |
| Operating temperature (without battery) | -40 to +85 °C |
| Storage temperature (without battery) | -40 to +85 °C |
| Operating humidity | 5 to 95 % (non-condensing) |
| Degree of protection | IP54 |
| Battery charging temperature | 0 to +45 °C |
| Battery discharge temperature | -20 to +60 °C |
| Battery storage temperature (1 month) | -20 to +35 °C |
The Teltonika FMC920 is a compact GPS tracker with integrated 4G Cat 1 technology, designed for basic track-and-trace applications as well as fleet management. The device features Bluetooth® connectivity, internal high-gain antennas for GNSS and GSM, and an integrated buffer battery that enables continuous functionality even when external power supply is interrupted. The 4G Cat 1 technology offers higher bandwidth, lower latency, and improved spectrum efficiency compared to older standards, ensuring reliable data transmission. The integrated GNSS receiver technology supports GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, and AGPS, with sensitivity during tracking up to -165 dBM. Positioning accuracy is under 3 meters, with a hot start in under one second, a warm start under 25 seconds, and a cold start under 35 seconds.
Applications
The FMC920 is suitable for a wide range of application scenarios in vehicle tracking, particularly for light vehicles, motorcycles, insurance telematics, rental and leasing vehicles, as well as courier and delivery services. The integrated sensors and interfaces extend the application possibilities beyond pure position tracking, for example by monitoring driving behaviour, fuel consumption, or vehicle movements.
Functions and Equipment in Detail
The device features a digital input that can be used for status monitoring of ignition, door, or alarm button. The digital output enables remote control of a vehicle’s immobilizer. An analog input extends functionality to monitor temperature, humidity, fluid level, and other analog signals. The integrated accelerometer supports functions such as accident detection, overspeed detection, prolonged idling, vehicle theft detection, and automatic geofencing. Device configuration is performed via FOTA (Firmware Over The Air), web interface, Teltonika Configurator (via USB or Bluetooth®), and SMS.
Technology Explained Simply
The 4G Cat 1 technology ensures stable and fast data transmission, with the device falling back to the 2G GSM network in case of 4G connection interruption. The internal high-gain antenna for GNSS and GSM ensures optimal signal quality, even in challenging environments. The integrated buffer battery with 170 mAh (0.63 Wh) enables operation without external power supply, with charge and discharge conditions between -20 °C and +60 °C. Power supply is via a voltage range of 10 to 30 V DC with overvoltage protection. Power consumption values are under 2 mA in Ultra-Deep-Sleep mode, under 3 mA in Deep-Sleep mode, under 8 mA in Online-Sleep mode, under 12 mA in GNSS-Sleep mode, and under 28 mA in nominal operation at 12 V.
Compatibility and Accessories
The FMC920 supports Bluetooth® LE and is compatible with external devices such as EYE Beacon, OBDII Dongle, Inateck Barcode Scanner, and universal Bluetooth® LE sensors. Interfaces include a USB 2.0 Micro-USB port, two status LEDs, a Micro-SIM slot, and 128 MB internal flash memory. Device configuration and firmware updates can be performed via various methods, including FOTA, web interface, Teltonika Configurator (USB, Bluetooth®), and SMS.
Mounting and Installation
The device is compact with dimensions 79 mm × 43 mm × 12 mm and can be easily mounted in a vehicle. Installation is carried out via the integrated power supply and interfaces. The IP54 protection rating ensures protection against dust and splashing water, making the device suitable for indoor use as well as in lightly exposed outdoor environments. Operating temperature is -20 °C to +40 °C with integrated battery; without battery, the operating temperature range is -40 °C to +85 °C. Storage temperature without battery is also -40 °C to +85 °C. Operating humidity is 5 % to 95 %, non-condensing.
Advantages in Operation
The FMC920 offers high reliability and longevity due to robust construction and integrated safety features. The combination of 4G Cat 1, Bluetooth®, and GNSS enables flexible use in various industries. The integrated buffer battery ensures continuous functionality even during power failure. The diverse sensors and interfaces expand application possibilities and support comprehensive vehicle monitoring.