| General |
| Cable type | S/FTP |
| Category | Cat.6A |
| Frequency bandwidth | 500 MHz |
| Colour | Red |
| Connection sequence | EIA/TIA 568B |
| Shielding | S/FTP |
| Insulating material | LSZH |
| Bush | moulded, 90°/180°/270°, with latch protection |
| Surge insulation test | 6 kV |
The Telegärtner patch cable type 100009122 is an S/FTP data cable of category 6A (ISO/IEC) with a length of 15 metres. It is designed for use in structured cabling systems, particularly in networks requiring high data rates and reliable signal transmission over long distances. The cable features a frequency bandwidth of 500 MHz, making it suitable for applications with high bandwidth requirements, such as Gigabit Ethernet and future high-speed networks. The designation S/FTP describes the shielding: the entire cable is surrounded by a shield (S), and each individual pair is additionally foil-shielded (FTP), ensuring high immunity against electromagnetic interference (EMV).
Applications
This patch cable is intended for indoor use, particularly in server rooms, data centres, office buildings, and other environments where stable and interference-free data transmission is required. The use of LSZH (Low Smoke Zero Halogen) as insulation material ensures that only minimal smoke is produced in case of fire and no harmful halogen compounds are released, thereby increasing building safety. The red colour allows for easy visual identification within complex cabling systems.
Functions and Features in Detail
The connectors are equipped with a 90°, 180°, or 270° moulded boot, ensuring a secure and stable fit in patch panels or switches. The boot features a latch protection mechanism that prevents the connector from being accidentally released. The wiring sequence follows the EIA/TIA 568B standard, ensuring standardised cabling and compatibility with common network devices. The cable construction includes variants with very short boots, which are advantageous in tight mounting conditions or where space is limited.
Technology Explained Simply
The S/FTP shielding technology provides a double layer of protection: the outer shield protects the entire cable from external electromagnetic interference, while the individual foil shielding of each pair protects against crosstalk (cross-interference) within the cable. The 500 MHz frequency enables data transmission with bandwidth sufficient for modern network applications. The surge voltage insulation test at 6 kV ensures electrical safety and cable reliability under load.
Compatibility and Accessories
The cable is compatible with devices supporting ISO/IEC standards for Cat.6A and EIA/TIA 568B. It can be combined with other patch cables of the same category and shielding technology to ensure a consistent cabling system. Additional lengths and colours are available in the product line, including variants in grey, green, blue, yellow, black, white, and purple, enabling colour-coded classification of network paths. The use of LSZH materials is particularly advantageous in environments with high safety requirements, such as hospitals or public buildings.
Installation and Mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets on switches, patch panels, or other network devices. The moulded boot ensures a secure fit, preventing the cable from being easily pulled out. The cable’s thickness and shielding allow for flexible installation, even in tight channels or cable trays, without impairing signal quality.
Operational Advantages
The combination of high frequency bandwidth, double shielding, and robust connectors ensures reliable and interference-free data transmission. The LSZH insulation enhances fire safety, and the standardised wiring sequence according to EIA/TIA 568B ensures compatibility and easy maintenance. The colour marking simplifies identification and management of cabling, especially in complex network infrastructures.