Telegärtner L00006A0040, EAN: 4018359292232

Telegärtner L00006A0040 patch cable Cat7 50 m green

Cables > Data lines > Cat7 Patch Cables

Telegärtner L00006A0040 patch cable Cat7 50 m green

Lieske Part No. 264868
Mfg Part No L00006A0040
EAN-Code 4018359292232
Manufacturer Telegärtner
Here only 64,75 EUR
77,05 EUR incl. VAT

Further information for Telegärtner L00006A0040 patch cable Cat7 50 m green

General
Cable typePatch cable -
CategoryCat6a -
ShieldingS/FTP -
Frequency bandwidth500 MHz
ColourGreen -
Connection sequenceEIA/TIA 568B -
Bushmoulded, 90°/180°/270°, with latch protection -
InsulationLSZH -
Surge insulation test6 kV
The Telegärtner patch cable type 100009121 is a data cable of category Cat6a (ISO/IEC) with a length of 50 metres. It is used to connect network devices such as switches, routers, PCs or servers in a local area network (LAN) and is designed for high-speed applications. The cable features S/FTP (S-STP) shielding, which ensures high immunity against electromagnetic interference (EMI) and low emission of interference. The shielding is designed for frequencies up to 500 MHz, enabling data transfer rates up to 10 Gbit/s over the entire cable length. The cable colour is green, with additional colour variants such as grey, red, blue, yellow, black, white and purple available.

Applications
This patch cable is suitable for use in structured cabling systems in offices, data centres, industrial facilities and other IT infrastructures. The LSZH insulation (Low Smoke Zero Halogen) ensures low smoke development and prevents the release of toxic halogens in case of fire, thereby increasing safety in the operating environment. The cable construction with moulded boots in 90°, 180° and 270° configurations allows for flexible installation and secure connection to network sockets and devices. The boot is equipped with a latch protection to prevent mechanical damage.

Functions and Equipment in Detail
The wiring sequence complies with the EIA/TIA 568B standard, ensuring uniform and standardised cabling. The connector is equipped with a moulded boot, enabling a stable and durable connection. The boot is available in various angles (90°, 180°, 270°), allowing the cable to be adapted to different installation scenarios. Additionally, variants with very short boots are available, which are advantageous in tight spaces or for specific mounting requirements. The surge voltage insulation test at 6 kV ensures the electrical safety of the cable.

Technology Explained Simply
The designation S/FTP (also S-STP) describes a shielding configuration in which the entire cable core (S) is surrounded by a metallic shield, and each individual pair (FTP) is additionally shielded with a foil. This provides very high resistance to interference and minimises crosstalk between individual pairs. The frequency bandwidth of 500 MHz enables high-speed data transmission, which is required for modern network applications. The LSZH insulation is particularly suitable for areas with high occupancy, as it does not release toxic gases when heated or on fire.

Compatibility and Accessories
The patch cable is compatible with all devices that support an RJ45 connector and comply with the Cat6a (ISO/IEC) and EIA/TIA 568B standards. It can be used in combination with other patch cables of the same category and shielding to ensure consistent network cabling.

Installation and Mounting
Installation is carried out by simply inserting the RJ45 connectors into the corresponding sockets of switches, routers or network connections. The moulded boot ensures a secure and mechanically stable connection. During installation, care must be taken to avoid damaging the boot to ensure the functionality and service life of the cable. The various angles of the boot allow for flexible positioning, especially in tight racks or when cabling devices with limited access.

Operational Advantages
The cable provides reliable and stable data transmission at high speeds. The shielding protects against interference, which is particularly important in environments with high electromagnetic activity. The LSZH insulation increases safety in use, especially in enclosed spaces. The uniform wiring sequence according to EIA/TIA 568B simplifies maintenance and fault diagnosis in the network. The robust construction with latch protection and moulded boot ensures a long service life and low maintenance requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/264868
qrcode für Telegärtner L00006A0040 patch cable Cat7 50 m green