Telegärtner L00006A0036, EAN: 4018359292195

Telegärtner L00006A0036 Patch Cable Cat7 20m gray

Cables > Data lines > Cat7 Patch Cables

Telegärtner L00006A0036 Patch Cable Cat7 20m gray

Lieske Part No. 229792
Mfg Part No L00006A0036
EAN-Code 4018359292195
Manufacturer Telegärtner
Here only 50,79 EUR
60,44 EUR incl. VAT

Further information for Telegärtner L00006A0036 Patch Cable Cat7 20m gray

General
Cable typeS/FTP
CategoryCat.6a
Bandwidth500 MHz
ColourGrey
Wiring1:1
Connection sequenceEIA/TIA 568B
ShieldingS/FTP
Insulating materialLSZH
Bushmoulded, 90°/180°/270°, with latch protection
Surge insulation test6 kV
The Telegärtner patch cable Cat.6a (ISO/IEC) with manufacturer number L00006A0036 and type 100009117 is a data transmission cable for use in network infrastructures. It has a length of 20 metres and is available in grey. The cable is designed as S/FTP (S-STP), meaning it features shielding of the entire cable structure as well as individual pairs, to minimise electromagnetic interference. Shielding is particularly important for signal integrity at high transmission rates and in environments with strong electromagnetic influence. The transmission bandwidth is 500 MHz, enabling use in modern networks with high data rates. The wiring follows the standard EIA/TIA 568B, ensuring a uniform and standardised connection sequence. The cable designation is MP8 FS 500 LSZH-20,0, where LSZH stands for Low Smoke Zero Halogen, indicating a material composition with low smoke emission and no halogens during combustion, which is relevant for safety in indoor environments.

Applications
This patch cable is designed for use in structured cabling systems, particularly in offices, server rooms, and other IT environments where high data transmission performance and reliability are required. The 20-metre length makes it suitable for longer connections between switches, servers, or workstations, without requiring additional extensions or couplers. The shielding and high bandwidth ensure stable signal transmission even in environments with electromagnetic interference sources.

Functions and Equipment in Detail
The connectors are fitted with a moulded boot, available in 90°, 180°, and 270° angles. This boot protects the connector and prevents accidental disconnection, as it includes a latch lock protection. The boot is designed to mechanically stabilise the connector and ensure a clean connection. The cable connection is made using a 1:1 wiring configuration, meaning the pins at one end are directly connected to the corresponding pins at the other end, without rerouting. This is the standard wiring for patch cables and ensures direct and error-free data transmission.

Technology Explained Simply
The designation S/FTP describes the shielding type: S stands for shielding of the entire cable structure (Screen), FTP for shielding of individual pairs (Foil Twisted Pair). This double shielding reduces electromagnetic interference (EMI) and crosstalk between individual conductors. The 500 MHz bandwidth enables data transmission rates up to 10 Gbit/s over the full length of 20 metres, meeting the requirements of modern networks. The LSZH insulation ensures that only minimal smoke is produced in case of fire and no toxic halogens are released, increasing safety at the installation site. The surge voltage insulation test at 6 kV confirms the electrical safety of the cable.

Compatibility and Accessories
The cable is compatible with network devices supporting the Cat.6a standard, including switches, routers, network interface controllers, and other end devices. It can be combined with other patch cables of the same category to ensure consistent network performance. In Telegärtner’s product line, other lengths and colours are available, such as grey cables in 1.0 m, 1.5 m, or 5 m lengths, also in S/FTP configuration. Additionally, couplers such as the AMJ coupling K Cat.6a insulated RJ45 (f-f) are available for extending or branching cables.

Installation and Mounting
Installation is done by simply inserting the RJ45 connectors into the corresponding sockets of the network devices. The moulded boot facilitates installation by mechanically stabilising the connector and preventing accidental disconnection. The connectors are designed for secure connections and can be mounted without tools. The cables are flexible and can be easily routed in cable ducts, shafts, or on the floor. The grey colour allows for discreet integration into existing cabling systems.

Operational Advantages
The cable offers high reliability and signal stability over the full length of 20 metres. The double shielding ensures minimal interference, which is particularly beneficial in environments with high electromagnetic noise. The LSZH insulation increases safety in case of fire. The 1:1 wiring according to EIA/TIA 568B ensures clear and error-free signal transmission. The moulded boot with latch lock protection extends the cable’s service life by reducing mechanical stress and protecting against accidental disconnection.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/229792
qrcode für Telegärtner L00006A0036 Patch Cable Cat7 20m gray