Telegärtner L00005A0027, EAN: 4018359286705

Telegärtner L00005A0027 Patch Cable Cat7 10m gray

Cables > Data lines > Cat7 Patch Cables

Telegärtner L00005A0027 Patch Cable Cat7 10m gray

Lieske Part No. 316523
Mfg Part No L00005A0027
EAN-Code 4018359286705
Manufacturer Telegärtner
Here only 14,56 EUR
17,32 EUR incl. VAT

Further information for Telegärtner L00005A0027 Patch Cable Cat7 10m gray

General
Cable typeS/FTP
CategoryCat.6A
Frequency bandwidth500 MHz
Connection sequenceEIA/TIA 568B
ColourGrey
MaterialLSZH
BushMoulded, with latch protection
Bush angle90°, 180°, 270°
Surge insulation test6 kV
PIN assignmentaccording to EN 50173 and EIA/TIA 568A
The Telegärtner patch cable Cat.6A, type 100008981, manufacturer number L00005A0027, is a high-quality data cable for use in structured cabling systems. It features S/FTP (S-STP) shielding, ensuring effective protection against electromagnetic interference. The cable is designed for frequencies up to 500 MHz and complies with ISO/IEC and EIA/TIA standards, making it suitable for modern network applications with high data rates. The connection sequence follows EIA/TIA 568B, enabling a standardized and reliable connection between network devices. The cable is available in grey and is supplied in a length of 10 metres.

Applications
This patch cable is designed for use in office and industrial facilities as well as data centres, where stable and interference-free data transmission is required. The shielding and high frequency bandwidth make it particularly suitable for applications with high requirements for signal integrity, such as Gigabit-Ethernet or 10 Gigabit-Ethernet. The use of LSZH (low smoke zero halogen) materials in the cable jacket and boot ensures low smoke emission and avoids the release of toxic halogen compounds in case of fire, enhancing safety in enclosed spaces.

Functions and Equipment in Detail
The cable features a moulded boot available in 90°, 180°, and 270° angles, enabling flexible installation on various devices and in confined spaces. The boot is equipped with a latch lock protection, which enhances the mechanical stability of the connector and prevents accidental disconnection. A variant with a very short boot is also available, which is advantageous in space-constrained environments. The pin assignment follows EN 50173 and references EIA/TIA 568A, ensuring compatibility with a wide range of network devices.

Technology Explained Simply
The S/FTP (S-STP) shielding means that the entire cable is covered with an outer shielding layer, and each individual pair inside is additionally shielded. This provides high resistance to interference and minimizes crosstalk between individual conductor pairs. The frequency bandwidth of 500 MHz enables high-speed data transmission, which is required for modern networks. The surge voltage insulation test at 6 kV ensures the electrical safety of the cable. The LSZH (low smoke zero halogen) material ensures that only minimal smoke is produced and no toxic halogen compounds are released in case of fire.

Compatibility and Accessories
The patch cable is compatible with network devices supporting Cat.6A and ISO/IEC standards. It can be combined with other patch cables of the same category to extend or connect networks. Suitable accessories, such as AMJ couplers for Cat.6a, are also available and allow connecting two patch cables without additional connectors. The use of component-tested cables (e.g. GHMT certified) can further increase the reliability of the connection.

Installation and Mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets of the network devices. The moulded boot facilitates installation, especially in confined spaces or during vertical installations. The strain relief of the cable ensures that no mechanical stress is transferred to the connectors, extending the cable’s service life. The various boot angle options allow optimal positioning and help avoid cable entanglement.

Operational Advantages
The cable provides high signal quality and minimizes interference, resulting in a stable and reliable network connection. The use of LSZH materials enhances fire safety, which is particularly beneficial in enclosed spaces. The robust construction with latch lock protection and strain relief ensures a long service life and reduces maintenance costs. Standardization according to EIA/TIA 568B and EN 50173 guarantees compatibility with a wide range of network devices.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/316523
qrcode für Telegärtner L00005A0027 Patch Cable Cat7 10m gray