| General |
| Cable type | S/FTP |
| Category | Cat6A |
| Bandwidth | 500 MHz |
| Connection sequence | EIA/TIA 568B |
| Bush | moulded, 90°/180°/270°, with latch protection |
| Colour | Black |
| Insulating material | LSZH |
| Surge insulation test | 6 kV |
The Telegärtner patch cable type 100008831 is a data cable of category Cat6A (ISO/IEC) with a length of 7.5 metres. It is used to connect network devices such as switches, routers, PCs or servers in a local area network (LAN) and supports data transfer rates up to 10 Gbit/s over a bandwidth of 500 MHz. The cable is designed as S/FTP (S-STP), meaning it features shielding on both cable and pair level to minimise electromagnetic interference and ensure high signal integrity. Shielding is particularly important in environments with high electromagnetic interference, such as server rooms or industrial facilities.
Applications
This patch cable is designed for use in structured cabling systems, particularly in environments requiring high data transmission quality and interference protection. It is suitable for office and industrial applications where a reliable and fast network connection is required.
Functions and equipment in detail
The cable features a moulded boot in angles 90°, 180° and 270°, providing a latch protection. This protection prevents the connector from accidentally disengaging from the network port and increases the mechanical stability of the connection. The connection sequence follows the EIA/TIA 568B standard, ensuring standardised pin assignment and compatibility with common network devices. The cable colour is black, with additional colour variants available such as grey, green, red, blue, yellow, white and purple, enabling better cable identification in complex networks. Additionally, variants with a very short boot are available, which are advantageous in tight installation conditions.
Technology explained simply
The designation S/FTP (also S-STP) describes a shielding technology where the entire cable is surrounded by a metallic shield, and additionally each individual pair inside the cable is shielded. This reduces electromagnetic interference (EMI) and crosstalk between individual wire pairs, which is crucial for high transmission speeds and stability. The bandwidth of 500 MHz enables use of the cable for 10-Gigabit-Ethernet applications. The surge voltage insulation test at 6 kV ensures the cable operates safely even under high electrical stress.
Compatibility and accessories
The patch cable is compatible with all devices featuring an RJ45 socket supporting Cat6A or higher category. It can be combined with other patch cables of the same category to create network connections. Further lengths and colours are available in the product line, including variants with LSZH insulation (Low Smoke Zero Halogen), which emit little smoke and no toxic halogens in case of fire.
Installation and mounting
Installation is performed by directly inserting the RJ45 connectors into the corresponding sockets of the network devices. The moulded boot ensures a secure connection and prevents accidental disengagement. When mounting in tight spaces or in rack systems, selecting the boot type (e.g. very short) is beneficial to save space. Cable routing should be carried out to avoid mechanical stress such as bending radii below 40 mm or pressure on the cable, to maintain performance.
Advantages in operation
The combination of S/FTP shielding, high bandwidth and the robust boot ensures reliable, interference-free data transmission. The standardised connection sequence according to EIA/TIA 568B ensures compatibility and simplifies maintenance. The wide range of colours enables clear identification and structuring of network cables, facilitating fault diagnosis and maintenance. The surge voltage insulation test at 6 kV increases safety under electrical stress.