Further information for Telegärtner L00004A0057 Patch Cable Cat7 7.5m blue
General
Cable type
S/FTP
Category
6A
Frequency bandwidth
500 MHz
Colour
Blue
Connector type
MP8
Connection sequence
EIA/TIA 568B
Exit direction
90° / 180° / 270°
Surge insulation test
6 kV
Material outer sheath
LSZH
Conductor material
Cu
Conductor cross-section
AWG27/7
Compatibility
10 Gbit/s Ethernet, PoE IEEE 802.3bt
Approval
UL listed
Application class
EA
Locking lever
Mounting clip slots
RFID transponder
Cable length indication on sleeve
The Telegärtner patch cable type 100008829 is an S/FTP data cable of category 6A, designed for use in networks with high requirements for bandwidth and signal integrity. It has a length of 7.5 metres and is available in blue. The cable is designed for applications of class EA and supports 10 Gbit/s Ethernet. It is also suitable for power supply over the network cable according to IEEE 802.3bt, i.e. for 4-pair Power over Ethernet. The cable construction consists of an S/FTP-4x2xAWG27/7 cable with a frequency bandwidth of 500 MHz, classified as Cat.7 (600 MHz). The connectors are of type MP8 and feature a moulded boot available in 90°, 180° or 270° exit directions. This boot is equipped with a latch lock protection to prevent mechanical damage. The wiring sequence follows the EIA/TIA 568B standard. The boot features grooves for mounting a clip, facilitating installation in patch panels. Additionally, an RFID transponder is integrated, enabling AIM functionality. The cable length is directly marked on the boot, simplifying identification and maintenance in the network.
Applications
This patch cable is suitable for use in structured cabling systems in offices, data centres and other IT environments where high data rates and reliability are required. Category 6A enables data transmission up to 10 Gbit/s over the full cable length of 7.5 m. Support for PoE according to IEEE 802.3bt makes it suitable for powering IP cameras, access points or phones that are supplied with power via the network cable. The LSZH jacket (Low Smoke Zero Halogen) ensures low smoke emission and prevents the release of toxic halogens in case of fire, increasing safety within the building.
Functions and Equipment in Detail
The connector boot is available in three exit directions (90°, 180°, 270°), enabling flexible installation in various patch panels and enclosures. The integrated groove structure on the boot allows attachment of a mounting clip, stabilising the cable in the panel and supporting orderly cabling. The integrated RFID transponder enables identification and management of the cable via asset management systems. The direct marking of cable length on the boot simplifies inventory and maintenance. The surge voltage insulation test at 6 kV ensures high electrical safety. The blue colour is one of the available colour variants, aiding better identification and structuring of cabling.
Technology Explained Simply
The S/FTP cabling system (Screened/Foiled Twisted Pair) offers a high level of protection against electromagnetic interference (EMV) and crosstalk. Shielding is provided both at the pair level (foil) and at the overall cable level (screen), ensuring particularly high signal quality and stability. The frequency bandwidth of 500 MHz enables high-speed transmission of large data volumes. The AWG27/7 conductors are made of copper (Cu) and are designed for high conductivity. The LSZH jacket (Low Smoke Zero Halogen) is environmentally friendly and safe in case of fire, as it does not release toxic gases and produces minimal smoke.
Compatibility and Accessories
The patch cable is compatible with all devices supporting Cat.6A connections, including switches, routers, servers and end devices. It can be used in existing structured cabling systems complying with ISO/IEC 11801 for class EA. The connectors are designed for standard RJ45 sockets. Suitable accessories include additional Cat.6A patch cables in various lengths, also in S-STP (S/FTP) configuration, component-tested (GHMT certified) and with AWG26 conductors. These are available in blue and offer a consistent cabling solution.
Installation and Mounting
Installation is performed by simply plugging into an RJ45 socket or patch panel. The moulded boot in 90°, 180° or 270° exit directions allows adaptable installation to different mounting conditions. The grooves on the boot enable attachment of a mounting clip, securing the cable in the panel and ensuring orderly cabling. The integrated RFID function supports digital inventory and maintenance of the cable.
Operational Advantages
The patch cable offers high reliability and signal quality due to S/FTP shielding and a frequency bandwidth of 500 MHz. Support for 10 Gbit/s Ethernet and PoE according to IEEE 802.3bt expands its application possibilities. The LSZH jacket increases safety in case of fire. The RFID function and direct marking of cable length on the boot simplify management and maintenance in the network. The flexible exit direction of the boot enables adaptable installation in various environments.