Further information for Telegärtner L00003A0058 patch cable Cat7 5.0 m blue
General
Cable type
S/FTP
Category
6A
Bandwidth
500 MHz
Colour
Blue
Connection sequence
EIA/TIA 568B
Plug sleeve
injected, with latch protection, 90°/180°/270°
Conductor material
Cu
Conductor cross-section
AWG27/7
Material outer sheath
LSZH
Surge insulation test
6 kV
Connector type
MP8
AIM functionality
with RFID transponder
Cable length indication
On connector sleeve
Compatibility
10 Gbit/s Ethernet, IEEE 802.3bt PoE++
Approval
UL listed
Mounting clip slots
The Telegärtner patch cable type 100008646 is an S/FTP data cable of category 6A with a bandwidth of 500 MHz, designed for use in networks requiring high data rates. It has a length of 5 metres and is available in blue. The cable is designed for applications in class EA and supports 10 Gbit/s Ethernet. It is also suitable for power delivery over the network cable according to IEEE 802.3bt, i.e. for 4-pair Power-over-Ethernet applications. The construction is based on an S/FTP-4x2xAWG27/7 cable, specified as Cat.7 (600 MHz), but used for category 6A. The connectors are of type MP8 and feature a moulded boot with a latch protection, available in angles of 90°, 180° or 270°. The wiring sequence follows EIA/TIA 568B. The boot includes grooves for mounting clips and integrates an RFID transponder enabling AIM functionality. The cable length is directly marked on the boot.
Applications
This patch cable is suitable for use in structured cabling systems in offices, data centres and other IT environments where high data rates and reliability are required. Category 6A enables use in Gigabit and 10-Gigabit Ethernet networks. Support for PoE+ (IEEE 802.3at) and PoE++ (IEEE 802.3bt) makes it suitable for powering IP cameras, access points or telephone systems. The LSZH jacket (Low Smoke Zero Halogen) ensures low smoke emission and prevents the release of toxic halogens in case of heat or fire, making it particularly suitable for indoor use.
Functions and equipment in detail
The connector boot is available in various exit angles (90°, 180°, 270°), enabling flexible installation on patch panels, switches or other devices. The boot features latch protection to prevent mechanical damage. The integrated grooves allow attachment of a mounting clip, ensuring orderly and secure cabling. The RFID transponder in the boot supports asset management functions (AIM), enabling identification and tracking of the cable within the network. The cable length is directly marked on the boot, which is helpful during installation and maintenance.
Technology explained simply
The cable is constructed as S/FTP (Screened/Foiled Twisted Pair), meaning that each of the four pairs is shielded with aluminium foil and the entire cable is additionally surrounded by a metallic shield. This shielding reduces electromagnetic interference (EMI) and crosstalk, ensuring stable and fast data transmission. The AWG27/7 conductors are made of copper (Cu) and designed for high conductivity. The 500 MHz bandwidth enables high-speed data transmission over the entire cable length. The surge voltage insulation test at 6 kV ensures electrical insulation and cable safety.
Compatibility and accessories
The patch cable is compatible with network devices supporting EIA/TIA 568B and ISO/IEC standards for category 6A. It can be combined with other patch cables of the same category to ensure consistent cabling. Suitable accessories available in the range include additional category 6A patch cables in various lengths (0.5 m to 15 m), also in blue, with S-STP (S/FTP) shielding, AWG26, and GHMT-certified. These are also designed for 500 MHz and can be used for expansion or replacement cabling.
Installation and mounting
Installation is performed by inserting the RJ45 connectors into the corresponding sockets of switches, patch panels or other network devices. The moulded boot in angles of 90°, 180° or 270° allows flexible positioning, especially in confined spaces or when mounting on vertical or horizontal panels. The integrated grooves for mounting clips facilitate cable fixation and organisation. The RFID function requires no special installation, but readability of the transponder by the used asset management systems is necessary.
Advantages in operation
The cable offers high bandwidth and stability, which is crucial for reliable data transmission in modern networks. Shielding against electromagnetic interference ensures a low error rate. Support for PoE++ expands application possibilities, especially for powering network devices without additional power supply. The LSZH jacket increases safety in indoor environments. The RFID function enables efficient management and documentation of cabling. The direct marking of cable length on the boot simplifies identification and maintenance.