Telegärtner L00003A0056, EAN: 4018359286613

Telegärtner L00003A0056 Patch Cable Cat7 5m green

Cables > Data lines > Cat7 Patch Cables

Telegärtner L00003A0056 Patch Cable Cat7 5m green

Lieske Part No. 981561
Mfg Part No L00003A0056
EAN-Code 4018359286613
Manufacturer Telegärtner
Here only 15,20 EUR
18,09 EUR incl. VAT

Further information for Telegärtner L00003A0056 Patch Cable Cat7 5m green

General
Cable typeS/FTP
CategoryCat.6a
Bandwidth500 MHz
ColourGreen
Connection sequenceEIA/TIA 568B
Connector shielding360° fully enclosed
Cable jacketLSZH
Bushmoulded, 90°/180°/270°, with latch protection
Surge insulation test6 kV
Short nameMP8 FS 500 LSZH-5,0
Tension reliefYes
FlexibilityYes
The Telegärtner patch cable Cat.6a, type 100008644, manufacturer number L00003A0056, is a shielded data cable for use in structured cabling systems. It has a length of 5 metres and is available in green. The cable is designed for connecting network devices such as switches, routers, PCs or servers and supports data transfer rates up to 10 Gbit/s over a bandwidth of 500 MHz. The cable construction is based on S/FTP technology (S-STP), where the entire cable structure and individual pairs are shielded to minimise electromagnetic interference and ensure high signal integrity.

Applications
This patch cable is suitable for use in office and industrial applications where high data rates and low interference are required. It is particularly suitable for environments with high electromagnetic interference, such as near machines, motors or other electrical devices. The use of LSZH (low smoke zero halogen) as jacket material ensures low smoke emission and the release of no or only minimal halogen-containing gases in case of fire, increasing safety in enclosed spaces.

Functions and Features in Detail
The cable is equipped with a moulded boot available in 90°, 180° and 270° angles, providing a latch lock protection. This boot ensures a stable connection and protects the RJ45 connector from mechanical stress. The connectors feature 360° shielding, protecting the entire connector all around and thus ensuring optimal protection against electromagnetic interference. The wiring sequence follows EIA/TIA 568B, enabling compatible connection with standard network devices. The cable is flexible and strain-relieved, allowing easy handling and installation even in confined spaces.

Technology Explained Simply
The S/FTP technology (S-STP) means that both the entire cable and the individual pairs are shielded. This double shielding reduces electromagnetic interference (EMI) and crosstalk between conductors, which is particularly important at high transmission rates. The bandwidth of 500 MHz enables stable data transmission up to 10 Gbit/s, which is crucial for modern networks with high demands on speed and reliability. The use of LSZH material for the cable jacket and boot improves fire safety, as only minimal smoke is produced and no harmful halogen compounds are released in case of heat or fire.

Compatibility and Accessories
The patch cable is compatible with all devices that support an RJ45 connection and meet the Cat.6a (ISO/IEC) standards. It can be combined with other patch cables of the same category to extend or connect networks. Within the product line, variants with different lengths (e.g. 1.5 m, 3 m, 10 m, 20 m) and colours (grey, red, blue, yellow, black, white, purple) are available, enabling flexible design of network infrastructures. Additionally, accessories such as the AMJ coupling K Cat.6a insulated RJ45 (f-f) are available for extending or connecting cables.

Installation and Mounting
Installation is carried out by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The moulded boot ensures a secure connection and prevents accidental disconnection. The strain relief at the cable end protects the connection from mechanical stress caused by pulling or bending. The flexible cable structure facilitates routing in cable ducts, enclosures or hard-to-reach locations.

Operational Advantages
The cable offers high reliability and stability in data transmission, even over long distances. The double shielding ensures minimal interference, which is particularly beneficial in environments with high electromagnetic interference. The use of LSZH material increases safety in case of fire, as smoke emission is low and no harmful gases are released. The strain relief and flexible structure simplify installation and extend the cable's lifespan by reducing mechanical stress.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/981561
qrcode für Telegärtner L00003A0056 Patch Cable Cat7 5m green