Telegärtner L00001A0090

Telegärtner L00001A0090 patch cable CAT6A 1.5 m grey

Cables > Data lines > Cat6 Patch Cable

Telegärtner L00001A0090 patch cable CAT6A 1.5 m grey

Lieske Part No. 900844
Mfg Part No L00001A0090
EAN-Code
Manufacturer Telegärtner
Here only 4,43 EUR
5,27 EUR incl. VAT

Further information for Telegärtner L00001A0090 patch cable CAT6A 1.5 m grey

General
Cable typePatch cable
CategoryCat6A
Bandwidth500 MHz
ShieldingS-STP (S/FTP)
WiringAWG26
ColourGrey
ConnectorRJ45
The Telegärtner Patch cable Cat6A is a data cable for use in network infrastructures, offering high transmission performance and reliability. It is specifically designed for connecting network devices such as switches, routers, PCs or servers and enables data transmission with a bandwidth of up to 500 MHz. The cable is grey in colour and has a length of 1.5 metres. It features S-STP (S/FTP) shielding, which provides effective protection against electromagnetic interference and thus ensures stable signal transmission even in environments prone to interference. The AWG26 wire gauge ensures sufficient conductivity and mechanical robustness.

Applications
This Cat6A patch cable is suitable for use in modern Ethernet networks, particularly in environments requiring high data rates and low latency. It is commonly used in office buildings, data centres, industrial facilities or for cabling smart home systems. The shielding makes it especially suitable for areas with high electromagnetic interference, such as near machines, transformers or other electrical equipment.

Functions and Equipment in Detail
The cable is fitted with RJ45 connectors at both ends, ensuring a secure and mechanically stable connection. The S-STP (S/FTP) shielding consists of a shielded pair of shields, where each individual cable pair is additionally shielded and the entire cable also has an outer shield. This design minimises electromagnetic interference and prevents crosstalk between individual pairs. The use of AWG26 wires ensures sufficient electrical conductivity and high mechanical strength, extending the cable’s service life.

Technology Explained Simply
The designation Cat6A stands for Category 6 Augmented, an extension of the Cat6 standard that enables higher frequencies and thus higher data rates. The 500 MHz bandwidth allows data transmission in the Gigabit Ethernet range and beyond, for example for 10 Gigabit Ethernet over short distances. The S-STP (S/FTP) shielding is a combination of pair and overall shielding, which is particularly effective against external interference and against signal radiation from the cable itself. The AWG26 wire gauge corresponds to a diameter of approximately 0.51 mm, providing a good balance between flexibility and conductivity.

Compatibility and Accessories
The patch cable is compatible with all devices that support RJ45 connectors, including switches, routers, network interface cards and other network end devices. It can be used in existing Cat6 infrastructures, although the Cat6A standard offers higher performance. As accessories, additional patch cables of the same category (Cat6A) with various lengths and also S-STP shielding are available, for example in 1.0 m, 5 m or 1.5 m lengths, also in grey and with AWG26 wire gauge.

Installation and Mounting
Installation is carried out by simply plugging the RJ45 connectors into the corresponding ports on the network devices. It is recommended not to bend or twist the cable excessively to maintain its mechanical integrity. The shielding should not be damaged, as this would impair its shielding effect. The cables are intended for indoor use, and the shielding ensures a stable connection even in interference-prone environments.

Advantages in Operation
The Telegärtner Cat6A patch cable offers reliable and stable data transmission at high speeds. The S-STP shielding ensures minimal interference, which is particularly advantageous in critical applications. The AWG26 wire gauge ensures sufficient conductivity and longevity. The cable is finished in a neutral grey, allowing it to be discreetly integrated into cabling in offices or server rooms. The length of 1.5 metres is suitable for many standard applications, without leaving excessive cable residue.

The product is available on order basis and cannot be cancelled. It is delivered without additional components or documentation. The information refers exclusively to the described cable and its technical properties.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/900844
qrcode für Telegärtner L00001A0090 patch cable CAT6A 1.5 m grey