Further information for Telegärtner L00001A0087 Cat7 Patch Cable 2m blue
General
Cable type
S/FTP
Category
Cat.6A
Bandwidth
500 MHz
Data rate
10 Gbit/s
Connection sequence
EIA/TIA 568B
Colour
Blue
Connector type
MP8
Cable exit direction
90° / 180° / 270°
Cable length indication
on ferrule
Conductor material
Cu
Material outer sheath
LSZH
Surge insulation test
6 kV
PoE support
IEEE 802.3bt (4-Pair)
Application class
EA
Locking lever
Mounting clip slots
RFID transponder
AIM functionality
The Telegärtner patch cable Cat.6A, type 100008265, manufacturer number L00001A0087, is a data cable designed for use in networks of class EA. It features an S/FTP structure (S-STP) and is designed for a bandwidth of 500 MHz, enabling the transmission of 10 Gbit/s Ethernet. The cable is available in blue and has a length of 2.0 m. It is equipped with an MP8 connector type, which includes a molded boot in 90°, 180°, or 270° configuration, allowing for flexible installation on various devices and in different installation scenarios. The boot features a latch lock protection, ensuring a secure connection and protecting the cable against accidental disconnection.
Applications
This patch cable is designed for use in structured cabling systems, particularly in environments requiring high data rates and reliability. It is suitable for applications in the 10 Gbit/s Ethernet field and supports power delivery over the network cable according to IEEE 802.3bt, i.e., 4-Pair Power over Ethernet. Use in server rooms, data centers, office and industrial facilities is possible, with the LSZH jacket (Low Smoke Zero Halogen) ensuring minimal smoke development in case of fire. The cable construction complies with ISO/IEC standards and is certified for use in class EA.
Functions and Equipment in Detail
The connector boot features grooves that allow the insertion of a mounting clip to securely fasten the cable to devices. The cable length is directly marked on the boot, which is helpful during installation and maintenance. The wiring sequence follows EIA/TIA 568B, ensuring standardized cabling. The cable is equipped with an RFID transponder that supports AIM functionality (Asset Information Management), enabling identification of the cable within a management system. The conductors are made of copper (Cu) and are configured as AWG27/7, providing good electrical conductivity and mechanical stability.
Technology Explained Simply
The S/FTP structure (S-STP) means that each pair of the four conductors is individually shielded (FTP), and additionally, the entire cable is covered with an outer shielding layer (S). This double shielding reduces electromagnetic interference (EMI) and ensures high signal integrity, especially at high frequencies. The bandwidth of 500 MHz enables data transmission at speeds up to 10 Gbit/s over the full cable length of 2.0 m. The surge voltage insulation test at 6 kV ensures the electrical safety of the cable. The LSZH jacket material ensures that only minimal smoke and no toxic halogen compounds are released in case of fire.
Compatibility and Accessories
The patch cable is compatible with devices that support an RJ45 socket and are designed for Cat.6A cabling. It can be used in combination with other Cat.6A products such as patch cables, couplers, or patch panels. Suitable accessory products include, for example, Cat.6A patch cables in various lengths (0.5 m to 15 m), also in S/FTP structure and blue, as well as AMJ couplers for Cat.6A. Using cables with identical shielding structure (S/FTP) and standard (Cat.6A) ensures optimal signal transmission and minimizes the risk of interference.
Installation and Mounting
The molded boot in 90°, 180°, or 270° configuration allows for flexible mounting on various devices. The boot is equipped with a latch lock protection to ensure a secure connection. The grooves on the boot allow for attachment with a mounting clip, securing the cable to devices or patch panels. The cable length is directly marked on the boot, which is helpful during installation. Installation is performed by simply inserting the connector into the RJ45 socket of the device.
Operational Advantages
The patch cable offers high signal quality due to the S/FTP shielding and 500 MHz bandwidth. Support for 10 Gbit/s Ethernet and PoE (IEEE 802.3bt) makes it suitable for modern network applications. The LSZH jacket increases safety in case of fire. The AIM functionality provided by the integrated RFID transponder enables efficient inventory management. The robust construction with copper conductors and the molded boot ensures long service life and reliable connection. The wiring sequence according to EIA/TIA 568B ensures compatibility with standard devices.