Further information for Telegärtner L00000A0084 Patch Cable Cat7 1.0m blue
General
Cable type
S/FTP
Category
Cat.6A
Frequency bandwidth
500 MHz
Data rate
10 Gbit/s
Connection sequence
EIA/TIA 568B
Plug sleeve
90° / 180° / 270° sprayed with latch protection
Material outer sheath
LSZH
Conductor cross-section
AWG27/7
Cable length
1,0 m
Colour
Blue
Surge insulation test
6 kV
Smoke density
61034-2
Connector type
MP8
AIM functionality
with RFID transponder
Cable length indication
On connector sleeve
PoE support
IEEE 802.3bt
Utilization
for 10 Gbit/s Ethernet and PoE
Mounting clip slots
The Telegärtner patch cable Cat.6A, type 100007976, is a data cable designed for use in networks of class EA, intended for 10 Gbit/s Ethernet applications. It features an S/FTP structure (S-STP) with a frequency bandwidth of 500 MHz and is equipped with RJ45 connectors of type MP8. The cable construction is based on a 4x2xAWG27/7 copper cable, with the jacket material made of LSZH (Low Smoke Zero Halogen), ensuring low smoke emission and no release of halogens in case of fire. The cable colour is blue, and the length is 1.0 metre. The wiring sequence follows EIA/TIA 568B, ensuring standardised cabling for networks.
Applications
This patch cable is designed for use in structured cabling systems, particularly in environments requiring high data rates and high signal integrity. It is suitable for applications in the 10 Gbit/s Ethernet range and is compatible with Power over Ethernet (PoE) according to IEEE 802.3bt, where power is supplied via the network cable. The cable construction with S/FTP shielding provides effective protection against electromagnetic interference (EMI), which is particularly advantageous in environments with high electromagnetic loads. Typical use cases include server rooms, data centres, or office buildings with high network performance requirements.
Functions and Equipment in Detail
The cable connectors are moulded at 90°, 180°, and 270° angles and feature a latch lock protection, ensuring a secure connection and protecting the cable against accidental disconnection. The connector also includes slots for mounting clips, enabling easy attachment to patch panels or other installation components. The cable length is directly marked on the connector, facilitating identification and maintenance during operation. Additionally, an RFID transponder is integrated, supporting AIM functionality (Asset Information Management), allowing the cable to be tracked in management systems.
Technology Explained Simply
The S/FTP structure (S-STP) means that each of the four pairs is individually shielded (F/UTP), and the entire cable is additionally covered with an outer shielding layer (S/FTP). This double shielding ensures high resistance to interference and minimises electromagnetic interference transmission. The 500 MHz bandwidth enables a data transfer rate of up to 10 Gbit/s over the full cable length of 1 metre. The use of AWG27/7 copper conductors ensures good electrical conductivity and high mechanical stability. The LSZH jacket material is suitable for indoor use, as it emits only minimal smoke and releases no harmful halogens in case of fire.
Compatibility and Accessories
The patch cable is compatible with all devices supporting Cat.6A (ISO/IEC) and EIA/TIA 568B standards. It can be combined with other patch cables of the same category and shielding type to ensure consistent network performance. The use of couplers such as the AMJ coupling K Cat.6a (RJ45 f-f) allows for extending or branching connections. The cables are available in various colours, enabling visual differentiation of network connections on patch panels or in racks.
Installation and Mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets of switches, routers, patch panels, or end devices. The moulded connectors at various angles (90°, 180°, 270°) allow for flexible positioning, especially in tight racks or when cabling in patch panels. The integrated slots for mounting clips facilitate cable attachment and organisation. No special tools are required, as the connectors are directly inserted into the sockets.
Operational Advantages
The patch cable provides high signal quality and stability, resulting in reliable data transmission. The integrated AIM functionality via the RFID transponder enables efficient inventory management and maintenance. The EMI shielding ensures a low error rate during data transmission, especially in environments with high electromagnetic interference levels. The use of LSZH jacket material increases safety in case of fire, as it does not release harmful gases. The cables are designed for indoor use and meet the requirements for a safe and high-performance network infrastructure.