Telegärtner L00000A0075, EAN: 4018359286057

Telegärtner 100007967 patch cable Cat7 0.5 m blue

Cables > Data lines > Cat7 Patch Cables

Telegärtner 100007967 patch cable Cat7 0.5 m blue

Lieske Part No. 925422
Mfg Part No L00000A0075
EAN-Code 4018359286057
Manufacturer Telegärtner
Here only 8,71 EUR
10,36 EUR incl. VAT

Further information for Telegärtner 100007967 patch cable Cat7 0.5 m blue

General
Cable length0,5 m
ColourBlue
ShieldingS/FTP
Connector typeRJ45
Plug sleeve90° / 180° / 270° sprayed with latch protection
Connection sequenceEIA/TIA 568B
Cable typeCat.6A
Frequency bandwidth500 MHz
Material outer sheathLSZH
Conductor materialCu
Cable construction4x2xAWG27/7
Surge insulation test6 kV
AIM functionalitywith RFID transponder
Cable length indicationOn connector sleeve
Mounting clip slotsYes
The Telegärtner patch cable Cat.6A, type 100007967, is a data cable designed for use in networks of class EA, suitable for 10 Gbit/s Ethernet transmissions. It features S/FTP shielding (S/FTP = Shielded/Foiled Twisted Pair) and is equipped with RJ45 connectors of type MP8. The cable length is 0.5 m, and the color is blue. The cable is designed for use in structured cabling systems and complies with ISO/IEC and EIA/TIA 568B standards. The wiring sequence follows EIA/TIA 568B, ensuring standardized cabling.

Applications
This patch cable is designed for use in modern network infrastructures, particularly in environments requiring high data rates and reliable signal transmission. It is suitable for applications such as 10 Gbit/s Ethernet and supports 4-pair Power-over-Ethernet according to IEEE 802.3bt. The S/FTP shielding provides high immunity against electromagnetic interference and prevents crosstalk, which is especially important in dense network environments. The cable is intended for indoor use, with jacket materials made of LSZH (Low Smoke Zero Halogen), ensuring low smoke emission and no release of halogens in case of fire.

Functions and Features in Detail
The connector boots are molded with 90°, 180°, or 270° exit angles, enabling flexible installation on various devices and patch panels. The boots feature a latch lock protection, preventing accidental disconnection of the connector. Additionally, the boots have grooves to accommodate mounting clips, simplifying fixation in patch panels. The cable length is indicated on the boot, simplifying identification and maintenance in the network. The cable is equipped with an RFID transponder enabling AIM functionality (Asset Information Management), allowing the cable to be recorded and tracked in an asset management system.

Technology Explained Simply
The cable consists of four pairs of copper conductors (AWG 27/7), each individually shielded with aluminum foil. The entire cable is additionally surrounded by a metallic shield, resulting in S/FTP shielding. This construction minimizes interference and ensures high data integrity at frequencies up to 500 MHz. The surge voltage insulation test at 6 kV ensures electrical safety. The LSZH jacket material reduces smoke emission and the release of toxic gases in case of fire, increasing safety in enclosed spaces.

Compatibility and Accessories
The patch cable is compatible with network units supporting RJ45 connectors, including switches, routers, patch panels, and end devices. It can be combined with other patch cables of the same category (Cat.6A) to ensure consistent network performance. Compatible accessories, such as AMJ couplers or additional patch cables in various lengths and colors, are available to allow flexible adaptation of cabling.

Installation and Mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding ports. The molded boots in various angles allow optimal placement in patch panels or on devices. The use of mounting clips in the boots simplifies fixation and prevents the cable from hanging down. The RFID functionality supports documentation and inventory management in the network.

Operational Advantages
The patch cable offers high reliability and performance in high-speed networks. The S/FTP shielding and compliant wiring according to EIA/TIA 568B ensure stable signal transmission. The integrated AIM functionality enables efficient network management, while the LSZH jacket materials enhance safety in case of fire. The short cable length of 0.5 m is ideal for short connections between devices or within patch panels.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/925422
qrcode für Telegärtner 100007967 patch cable Cat7 0.5 m blue