| General |
| Degree of protection | not specified |
| Characteristic impedance | 50 Ohm |
| Mounting method | A0531 |
| Connection technology | solder/crimp |
| Crimp insert | N01003A0056 |
| Cable group | G30 (1.5/3.8), G54 (1.5/3.8 FLEX) |
The TNC cable right-angle connector from Telegärtner, type 100023704, manufacturer's number J01010A0037, is a passive connection component for high-frequency applications. It is designed for secure and durable connection of coaxial cables with a characteristic impedance of 50 Ohm to devices or antennas, where the right-angle design saves space within the device or on the mounting surface. The connector is designed for mounting type A0531 and can be connected either by soldering or crimping, using crimp insert N01003A0056.
Applications
This connector is designed for use in communication and radio systems, particularly in areas where compact mounting and a stable electrical connection are required. Typical application fields include antenna installation, radio equipment, router systems, or industrial communication technology. It is used in combination with coaxial cables from groups G30 and G54, specifically designed for 1.5/3.8 mm or 1.5/3.8 FLEX cables.
Functions and Features in Detail
The connector provides a mechanically stable and electrically reliable connection. The right-angle design reduces bending stress at the cable end and prevents unintended kinking. Mounting is possible either by soldering or crimping, with crimping enabling faster, tool-assisted installation. Dimensions a=13 mm and b=29 mm define the external dimensions of the connector, which must be considered during mounting surface planning.
Technology Explained Simply
The connector is designed for coaxial cables with a characteristic impedance of 50 Ohm, which is the standard value in high-frequency technology for most communication systems. This ensures minimal reflection and maximum signal transmission. The solder/crimp connection technology offers flexibility: soldering is suitable for permanent, handcrafted connections, while crimp connections can be produced quickly and with tools. The crimp insert N01003A0056 is specifically designed for cable groups G30 and G54, which include a wide range of coaxial cable types.
Compatibility and Accessories
The connector is compatible with coaxial cables from group G30 (1.5/3.8) and G54 (1.5/3.8 FLEX). Supported cable types include, among others, 02YS(ST)CY 1.4/3.7-50 LI, 1.4/3.8 AF, 7808A, CNT-240, HPF 240, LMR-240, MRC 240 AFB, S 04172 D, TZC 500 25, WCX240, SPEEDFOAM 240 HFJ, SX 04172 B-60, as well as H 155 and LOW LOSS 1.4/3.8. Using these cable types ensures optimal impedance matching and minimizes signal losses.
Mounting and Installation
Mounting is performed according to standard A0531, which defines the mechanical and electrical requirements for the connection. For crimping, the crimp insert N01003A0056 is used, specifically designed for the mentioned cable groups. Soldering requires careful cable preparation and precise soldering to ensure a durable electrical connection. The right-angle design facilitates installation in confined spaces and reduces mechanical stress on the cable.
Operational Advantages
The TNC cable right-angle connector provides a reliable and durable connection suitable for professional applications. The combination of right-angle design with crimp or solder connection enables flexible and robust mounting. Compatibility with a wide range of coaxial cables increases application flexibility, and compliance with standard A0531 ensures a standardized, high-quality connection.