Telegärtner J00060A0069, EAN: 4018359187682

Telegärtner J00060A0069 Connection Module Cat7A

Networks > Junction boxes > Cat6

Telegärtner J00060A0069 Connection Module Cat7A

Lieske Part No. 185032
Mfg Part No J00060A0069
EAN-Code 4018359187682
Manufacturer Telegärtner
Here only 44,45 EUR
52,90 EUR incl. VAT

Further information for Telegärtner J00060A0069 Connection Module Cat7A

General
ClassFA (ISO/IEC)
Bandwidth1000 MHz
Ethernet standard10GBASE-T
PoE standardPoE+
Compatibilityshielded and unshielded cables
Conductor cross sectionAWG26/1 to AWG22/1
Core diameter0.7 to 1.6 mm
Groundingvia screw M4 to printed circuit board
Colour codingT568A and T568B
Temperature range-40 to +70 °C
EMC safetyDIN EN 61000-6-1 and DIN EN 61000-6-2
Housing coatingcopper-coated
ColourBlack
The Telegärtner connection module type 100023273, manufacturer number J00060A0069, is a single connection module for the direct, fixed connection of two network cables. It is particularly used for extending lines or repairing damaged cable sections, without requiring a complete new cable installation. This reduces labor, costs, and operational downtime, especially when fire barriers would need to be opened and resealed. The module is suitable for use in office buildings, apartments, industrial facilities, as well as in technical building equipment and building automation.

Applications

The module is used to extend or repair existing installation cables, for example when distributors or connection outlets are relocated. It enables quick and cost-efficient maintenance without completely reconstructing the cabling. Its use is independent of cable shielding – it is suitable for both shielded and unshielded installation cables. Applications are in indoor and industrial environments where a stable and high-performance connection is required.

Functions and equipment in detail

The module features IDC cutting clamp contacts designed for solid conductors in the range AWG26/1 to AWG22/1, corresponding to a wire diameter of 0.7 to 1.6 mm. The wire pairs can be twisted up to the clamp, preserving the pair twist, which enhances signal quality and EMC compatibility. The contacts are arranged on a common printed circuit board, enabling a compact and robust design. The module can be reconnected up to fifty times, ensuring high reusability and operational flexibility.

Technology explained simply

The module is designed for Class FA (ISO/IEC), corresponding to a bandwidth of 1000 MHz. This makes it suitable for 10 Gigabit Ethernet (10GBASE-T) according to IEEE 802.3 and Power over Ethernet Plus (PoE+) according to IEEE 802.3at. Power delivery over the network cable (PoE+) allows end devices such as IP cameras or access points to be powered directly via the cable, without additional power supply. EMC safety according to DIN EN 61000-6-1 and DIN EN 61000-6-2 ensures low electromagnetic emissions and immunity to interference. The housing is internally copper-coated, providing additional protection against electromagnetic radiation and emission. Color coding follows T568A and T568B standards, enabling clear identification of wires in the network.

Compatibility and accessories

The module is compatible with standard 4- or 8-wire installation cables with an outer diameter up to 10 mm. It can be installed using various tools such as the Jokari PC-STRIPE cable stripper (for 5.5–15 mm) or the LSA-Plus Economy AWG24-20 installation tool. For installation of cables with higher bandwidth, such as Cat7, the cable 1885ENH 4x2xAWG23 Cat7 yellow S/FTP FRNC/LSOH 1000MHz 1000MHz 100m-carton is available. Grounding is achieved directly on the printed circuit board via an M4 screw, ensuring a secure electrical connection.

Installation and mounting

Installation is performed by inserting the cable ends into the IDC cutting clamps, while maintaining the wire pair twist up to the clamp. The cables are cut and contacted by the cutting clamps, creating a secure electrical connection. Color coding according to T568A and T568B facilitates correct wire assignment. The temperature resistance from -40 °C to +70 °C allows use in various environments, including industrial facilities with extreme temperatures.

Operational advantages

The module enables a high-performance connection with full bandwidth up to 1000 MHz, which is required for modern network applications such as 10 Gigabit Ethernet. Reusability up to 50 times reduces material consumption and long-term costs. EMC safety and the ability to ground via the printed circuit board increase connection reliability and stability. The compact design and robust construction ensure long service life and easy handling.

The module is available in black color and carries the short designation VM 8-8 Cat.7A (ISO/IEC).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/185032
qrcode für Telegärtner J00060A0069 Connection Module Cat7A