| General |
| Connector type | TP/RJ45 |
| Wiring standard | T568B |
| Cable category | CAT6A |
| Housing material | Zinc die-cast |
| Rotatability | in all four directions |
| Cable manager | 4-chamber |
| Cable strain relief | 3-stage |
| Cable diameter | 5.0 to 10.0 mm |
| Contact type | Piercing contacts |
| Compatibility | Solid conductors and stranded conductors |
| Accessories | Pre-mounted protective cap |
| Mounting method | Field configurable |
| Plug type | angled |
The Telegärtner connector TP/RJ45 is an angled, field-terminable network connector for use in structured cabling systems. It is designed for installation in cable connections in the CAT6A category and enables flexible mounting through rotatability in all four directions. The housing is made of robust zinc die-cast, ensuring high mechanical stability and durability. The connector is equipped with a pre-installed protective cap that protects the contact area from contamination and damage, especially during the installation process.
Field termination and wire management
The connector is designed for field termination, allowing it to be processed directly at the installation site without requiring pre-terminated cables. It features a 4-chamber wire manager that enables orderly and error-free assignment of individual wires. This is particularly important for complying with the T568B wiring standard, which is required for compatibility with modern network infrastructures.
Cable strain relief and contact technology
The 3-stage cable strain relief ensures secure fixation of the cable in the connector and prevents pulling out or mechanical stress on the wires. Supported cable diameters range between 5.0 and 10.0 mm. The piercing contacts are suitable for both solid and stranded conductors, enabling flexible use with different cable types. The contacts are designed to provide a reliable electrical connection, even at high frequencies.
Technology explained clearly
The connector is designed for use with cables in the CAT6A category, enabling a maximum bandwidth of 500 MHz. This is sufficient for Gigabit Ethernet applications and also supports future data transmission rate requirements. The use of zinc die-cast for the housing ensures high mechanical strength and resistance to external influences. Rotatability in all four directions facilitates installation in tight or inaccessible situations, such as in patch panels or cable distributors.
Compatibility and accessories
The connector is compatible with the T568B wiring standard, which is widely used in IT infrastructure. It can be combined with various cable types, particularly CAT7 and CAT7A cables, which are also available in the range. These cable types offer higher bandwidths and are suitable for demanding applications. Combining with flexible or installation-ready cables allows adaptation to different operating conditions, such as indoor or outdoor installations.
Mounting and installation
Installation is performed via field termination, with the wire manager supporting correct wire assignment. The pre-installed protective cap protects the contact area until final connection. The 3-stage cable strain relief ensures the cable is securely fixed in the connector. Rotatability facilitates mounting at various angles, which is advantageous when installing in patch panels or cable distributors.
Advantages in operation
The connector offers high mechanical stability due to the zinc die-cast housing and a reliable electrical connection through the piercing contacts. Field termination enables flexible and cost-efficient installation, especially in larger projects. Compatibility with T568B and support for both solid and stranded conductors increases applicability in various environments. The pre-installed protective cap reduces the risk of damage during installation and ensures clean processing.