* Order-related order *, description of the series/product category The newly developed, field-assembly connection module AMJ Module Cat.8.1 T568A/B in accordance with the IEC series 60603-7 (RJ45 8P8C) also enables secure data transmission with its robust zinc die-cast housing with 360° shielding in the event of external electrical disturbances. The slim, extremely short design with keystone mounting cutout makes installation in a wide variety of applications and housings easier. The IDC insulation displacement terminals for solid wire AWG23/1-22/1 ensure a secure connection that can be created in the field without special tools. A fine-grained strain relief and shield connection is used to adapt to different outer cable diameters of six to ten millimeters. For the potential quick connection, the modules can be connected directly with pre-assembled cables to the FS 2.8 mm flat plug connection. An integrated protective flap is included in the scope of delivery. Performance features Mechanical properties Plugging force = 30 N Material: Housing die-cast zinc Service life (plugging cycles RJ45, RJ12, RJ11) = 750 Cu conductor diameter: Solid wire 0.54 - 0.64 mm AWG23/1 - AWG22/1 Material: Shield phosphor bronze Core diameter 1, 0 - 1.6 mm Material: Insulating parts PBT UL94 HB natural Reconnectability of insulation displacement contacts for AWG 22/1 =4 cycles Material: PCB FR4 Reconnectability of insulation displacement contacts for AWG 22/1 and AWG 22/7 =4 cycles Material: Contact spring spring steel Reconnectability of insulation displacement contacts for AWG 23/1 - 26/1 =10 cycles Material: insulation displacement contacts CuNi2Si, tin-plated Cable diameter 6.0 - 10.0 mm Material: surface insulation displacement contacts min. 3-6 µm (120-240 µin) Sn Electrical properties Contact resistance = 20 m? Insulation resistance = 500 MO Dielectric strength: contact-contact = 1000 V, DC Dielectric strength: contact-shield = 1500 V, DC current carrying capacity at 50° C 1 A PoE+ according to IEEE 802.3at Suitable for Power over Ethernet+ standards connector IEC 60603-7-51 environmental requirements Ambient temperature -40° C to +85° C Transmission properties Category 8.1 (Component) ISO/IEC 11801, DIN EN 50173-1 Class I (Permanent Link) ISO/IEC 11801, DIN EN 50173-1 Class I (Channel) ISO/ IEC 11801, DIN EN 50173-1 Class E (Channel with coupling Cat.6) - Class D (Channel with coupling Cat.5e) - Gigabit Ethernet according to IEEE 802.3 fulfills 10 Gigabit Ethernet according to IEEE 802.3an fulfills 25/40 Gigabit Ethernet according IEEE 802.3bq met
Category 8.1/Class I according to ISO/IEC 11801-01 Connector according to IEC 60603-7 Series RJ45 8P8C 25/40GBase-T according to IEEE 802.3bq backwards compatible to Class EA according to backwards compatible to Class EA according to ISO/IEC 11801-1 (Permanent Link up to 90 m and channel up to 100 m) Lifespan = 750 mating cycles Material shielding housing: die-cast zinc, nickel-plated Cable outer diameter: 6 - 10 mm Temperature range: -40°C to 70°C Power over Ethernet plus (PoE+) according to IEEE 802.3at Cu conductor diameter: solid wire 0.54 0.64mm (AWG23 22/1) Wire diameter: 1.0 1.6mm IP20