* Order-related order *, MFP8 T568B Cat.8.1 with pre-assembled dust cap AWG26 - 24/1, AWG27 - 24/7 Note: The following information refers to the series/product category as a whole. The specific data sheet is relevant for individual products. Description of the series/product category To create direct connections between corresponding end devices or to assemble custom-made patch cords, Telegärtner presents the newly developed MFP8 Cat.8.1 cable connector, which can also be assembled in the field. This connector with a robust zinc pressure housing and a cable gland suitable for cable diameters of 5.5 - 10.0 mm can be connected on site to installation cables and patch cords of category Cat.8.1/Cat.8.2 with copper conductor cross-section AWG27/7 22/7 or AWG26/1 22 /1 can be connected without special tools. Performance features
with pre-assembled dust protection cap AWG26 - 24/1, AWG27 - 24/7 connector according to IEC 60603-7 RJ45 8P8C 25/40GBase-T according to IEEE 802.3bq backwards compatible to Class EA according to ISO/IEC 11801-1 (permanent link up to 90 m and Channel up to 100 m) 750 mating cycles Material contact surface: Ni1.2Au0.8 Material shielding housing: die-cast zinc, nickel-plated Cable outer diameter: 5.5 10.0 mm Cu conductor diameter: solid wire 0.41 0.51 mm (AWG26/1 24/1 ) Stranded wire 0.46 0.61 mm (AWG27/7 24/7) Wire diameter: 0.85 1.1 mm Reconnectability: = 4 cycles Temperature range: -40°C to 85°C Power over Ethernet plus (PoE+) according to IEEE 802.3at IP20 Cable strain relief: SW13
Mechanical properties Plug-in force = 30 N Service life (plugs) = 750 Reconnectability = 4 cycles Cu conductor diameter: solid wire 0.51 - 0.64 mm (AWG24/1-22/1) Cu conductor diameter: stranded wire 0.46 - 0.76 mm ( AWG27/7-22/7) Connection conditions Cu conductor diameter: stranded wire* 0.61 - 0.78 mm (AWG24-22/19) core diameter 1.0 - 1.6 mm Material: contacts spring steel Material: contact surface Ni1.2Au0.8 Material: connector housing PC UL94 V0 Material: Circuit board FR4 UL 94 V0 Material: Penetration contacts phosphor bronze tin-plated Material: Shield contact Brass, nickel-plated Material: Wire pre-sorting PC UL94 V0 white Material: Locking hook PBT UL94 V0 Material: Shielding housing die-cast zinc, nickel-plated Material: Cable support PBT UL94 V0 material : Protective cap PBT UL94 V0 Thermal and climatic properties Temperature range [°C] -40/ 85 UL E244889 Standards Connector IEC 60603-7-51 Transmission properties 10 Gigabit Ethernet according to IEEE 802.3an Suitable for 10 Gigabit Ethernet