Further information for Telegärtner 100011300 patch cable LWL duplex LC-LC 1,0 m 50/125 µm OM5 lime green
General
Fibre type
G50/125 OM5
Connector form
LC Duplex
Cable type
Duplex Zipcord
Cable diameter
2,8 mm
Colour housing
lindgreen
Cable sheath material
LSZH
Insertion Loss (IL)
< 0,25 dB
Return loss (RL)
> 30 dB
Plug cycles
> 1000
Relative humidity
95 %
Wiring standard
ISO/IEC 11801
Fibre category
OM5
Connector standard
IEC 61754-20
Model
PC
Cable construction
Duplex
Bend-optimized fiber
The Telegärtner LWL patch cable type 100011300 is a duplex connection cable for structured cabling in accordance with ISO/IEC 11801. It is used in application areas such as data centres, office buildings, and telecommunications rooms where reliable optical data transmission is required. The cable connects two LC duplex connectors and is specifically designed for use in multimode networks. The fibres comply with the OM5 (G50/125) standard, enabling high bandwidth and compatibility with modern high-speed applications. The bend-optimised fibre construction ensures stable signal transmission even in limited space, for example in narrow cable ducts or under frequent bending stress.
Applications
This patch cable is designed for use in structured cabling systems, particularly in environments with high requirements for reliability and performance. It is suitable for connecting network devices such as switches, routers, servers, and other optical end devices. Typical use is in data centres and office buildings, where cables are often mechanically stressed and a long service life is required. The configuration as a crossover cable (in accordance with ISO/IEC 11801) enables direct connection between two identical devices without additional crossover adapters.
Functions and Equipment in Detail
The cable features two LC duplex connectors manufactured in accordance with IEC 61754-20. The LC duplex connector design enables a compact and secure connection, widely used in modern network infrastructures. The connector finish is PC, ensuring a smooth, flat polished surface to minimise signal loss (insertion loss). Typical insertion loss (IL) is below 0.25 dB, guaranteeing high signal quality and low attenuation. Return loss is typically above 30 dB, minimising reflections in the cable and enhancing signal integrity. The connectors are designed for more than 1000 mating cycles, ensuring high mechanical robustness and long service life.
Technology Explained Simply
The fibres in the cable are specified as G50/125 OM5, meaning the core diameter is 50 µm and the cladding diameter is 125 µm. This specification is optimised for multimode networks, particularly for high-data-rate applications such as 10 Gigabit Ethernet. The designation OM5 refers to the category of optical multimode fibre according to IEC 60793-2-10 Type A1a.2-4 and ITU G.651.1. The bend-optimised fibre construction reduces sensitivity to bending, which is particularly advantageous in tight installation situations. The cable itself is constructed as a duplex zipcord, with a diameter of 2.8 mm and an overall thickness of 5.7 mm, enabling flexible handling. The cable jacket material is LSZH (Low Smoke Zero Halogen), meaning it emits minimal smoke and no toxic halogen compounds when exposed to fire.
Compatibility and Accessories
The patch cable is designed for use in structured cabling systems in accordance with ISO/IEC 11801 and is compatible with devices supporting LC duplex connectors. It is designed for multimode applications and can be used in networks with OM3, OM4, and OM5 fibres. Use in single-mode environments is not intended. The cables are available in standard lengths of 1, 2, 3, 5, and 10 metres. Custom lengths can be produced via the TICNET configurator from Telegärtner.
Installation and Mounting
Installation is performed by simply inserting the LC duplex connectors into the corresponding ports on the network devices. The cables are designed for direct connection and require no additional adapters or converters. The light green housing colour facilitates visual identification in cable management. The cables are designed for relative humidity up to 95 %, enabling installation in indoor environments with normal air conditioning.
Operational Advantages
The cables offer high signal quality through low insertion loss and high return loss. The bend-optimised fibre construction ensures stable performance even under mechanical stress. The LSZH insulation increases safety in case of fire. The high number of mating cycles ensures long service life and reduces replacement requirements. Use in structured cabling systems in accordance with ISO/IEC 11801 ensures compatibility and standardisation.