| General |
| Colour | Grey |
| Tulip colour | Yellow |
| Cable type | S/FTP |
| Category | 6 |
| Connection type | Crossover |
| Data rate | 10/100/1000 Mbit/s |
| Material | LSZH |
| Short name | MP8 FS 500 LSZH Crossover 10/100/1000 BT-5,0 |
The Telegärtner patch cable type 100008652 is a data cable of category 6, configured as a crossover connection, with a length of 5 meters. It is used to connect network devices where a direct connection without a switch or router is required, for example between two computers or a computer and a router when no uplink port is available. The cable is gray in color and features a yellow boot on the connector serving as a visual identifier. The designation MP8 FS 500 LSZH Crossover 10/100/1000 BT-5,0 describes the technical configuration and compatibility with networks up to 1000 MBit/s (Gigabit Ethernet). The abbreviation LSZH stands for Low Smoke Zero Halogen, meaning that the cable emits only minimal smoke and no toxic halogen compounds when exposed to fire.
Applications
The cable is designed for use in local area networks (LAN), particularly in environments where a direct device connection is required. It is suitable for applications in office and industrial environments where stable, high-quality data transmission over short distances is needed. The crossover connection enables direct communication between two end devices without the need for an intermediate switch. The yellow boot serves as a visual identifier and facilitates identification in cable management.
Functions and Features in Detail
The patch cable is configured as S/FTP (Shielded/Foiled Twisted Pair), providing a high level of protection against electromagnetic interference (EMI). The shielding ensures stable data transmission even in environments prone to interference. The cable construction supports data rates up to 1000 MBit/s (Gigabit Ethernet) and is therefore suitable for modern network applications. The use of LSZH materials ensures better fire behavior and reduces the risk of smoke and gas development in case of fire. The cable color is gray, and the boot on the connector is yellow, enabling clear visual differentiation.
Technology Explained Simply
The designation S/FTP describes the shielding: S stands for overall cable shielding, FTP for Foiled Twisted Pair, meaning individual pairs are shielded with aluminum foil. This construction minimizes interference from external electromagnetic fields and prevents signal radiation from the cable. Category 6 (Cat6) guarantees a bandwidth of at least 250 MHz, sufficient to support Gigabit Ethernet (1000 MBit/s). The crossover wiring means that the conductors are connected differently at one end compared to the other, enabling communication between two identical devices. The yellow boot is a visual feature that helps quickly identify the cable in cable management.
Compatibility and Accessories
The cable is compatible with networks supporting Gigabit Ethernet (10/100/1000 MBit/s). It can be used in conjunction with network devices such as computers, switches, routers, or other end devices, provided a crossover connection is required. The use of LSZH materials also makes it suitable for locations where low smoke emission and no toxic gases during fire exposure are required.
Installation and Mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The yellow boot facilitates visual assignment and identification of the cable in cable management. No special tools or mounting equipment are required. The cable connection is mechanically robust and designed for indoor use.
Operational Advantages
The S/FTP shielding ensures high signal integrity and minimizes interference, resulting in stable and reliable data transmission. The crossover connection enables direct communication between two end devices without additional hardware. The use of LSZH materials improves safety in the event of fire. The gray color and yellow boot support visual identification and cable management.