Further information for Telegärtner 100006997 patch panel 12xTP Cat6A alpine white
General
Category
6A
Degree of protection
shielded
Number of connections
12 RJ45
Bandwidth
500 MHz
Transmission rate
10 Gbit/s
Current carrying capacity
1 A
Temperature range
-40 to +70 °C
Connector lifetime
750
Insertion force
30 N
Contact resistance
20 mΩ
Insulation resistance
500 MΩ
Voltage withstand contact-contact
1000 V DC
Voltage withstand contact-shield
1500 V DC
Housing material
ABS
Shielding cap
stainless steel sheet
Printed circuit board
FR4
PCB surface
Tinned
Contact spring
Spring steel
Contact spring surface
min. 0.8 µm Au over 1.2 µm Ni
Cutting clamp contacts
CuZn
Surface of cutting clamp contacts
Tinned
Core diameter
0,7 - 1,6 mm
Copper conductor diameter
0,41 - 0,64 mm
Colour
alpine white
Cable strain relief
included cable ties
Mounting
on wall, on trunking, on table, on TH35 mounting rail
PoE+
It serves as a cable distribution unit or connection module for user groups at the workstation, enabling the connection of up to 12 users via shielded or unshielded installation cables. Cables can be introduced from the rear or from below into the housing, allowing the distributor to be flexibly mounted on a wall, on a channel, or directly on a table. The design is not 48,3 cm ( 19 inch )-compatible, but intended for decentralized installations.
Applications
This distributor is suitable for small office networks, workstation groups, or temporary networks where a compact, inconspicuous, and cost-effective distribution is required. It can be installed in furniture, under desks, or on walls. The integrated mounting function for TH35 support rails in accordance with DIN EN 60715 expands its application possibilities. The maximum number of connections is 12 RJ45 sockets, arranged on a common printed circuit board.
Functions and Equipment in Detail
The connection sockets are equipped with LSA-Plus cutting terminals, enabling simple and secure connection of the conductors. Color coding follows EIA/TIA 568A and B, ensuring unambiguous assignment of conductors. The maximum length of connection wires is 13 mm, supporting user-friendly installation. The sockets feature contact bending protection, allowing both 6-pin (RJ11/RJ12) and 8-pin (RJ45) plugs to be used interchangeably without additional mounting effort. The service life of the plug connections is at least 750 mating cycles.
Technology Explained Simply
The distributor is designed as a shielded version, with the shield hood made of stainless steel. The 360-degree shielding contact is achieved directly on the printed circuit board via a clamp, enabling the cable’s shielding braid to be contacted without additional twisting. This ensures effective shielding against electromagnetic interference. The printed circuit board is mounted horizontally and, in shielded versions, is equipped with an internal metal shielding housing. Additionally, a PE cable can be secured to the printed circuit board via an M4 screw to ensure reliable grounding.
Compatibility and Accessories
The distributor is suitable for use with shielded and unshielded installation cables. It supports Cat.6A transmission technology in accordance with ISO/IEC 11801 and DIN EN 50173-1, enabling a bandwidth of 500 MHz and data transfer rates up to 10 Gigabit Ethernet as per IEEE 802.3an. The sockets are designed for PoE+ in accordance with IEEE 802.3at, allowing power supply over the network cable (Power over Ethernet). The current rating is 1 A at a temperature of 50 °C. Compatible accessories include, among others, Cat.6A patch cables, stripping tools, and installation tools for LSA-Plus systems.
Mounting and Installation
Mounting is tool-free on a wall, on a channel, or on a table. The anti-slip feet on the housing ensure stable positioning. Cables can be introduced from the rear or from below, with the housing made of halogen-free thermoplastic (ABS). The front plate is made of anodized aluminum, providing a robust and visually appealing surface. Port numbering on the housing lid facilitates assignment of connections.
Operational Advantages
The distributor offers high mechanical and electrical reliability, with a plug force of 30 N and a contact resistance of 20 mΩ. Insulation resistances are 500 MΩ, and dielectric strength is 1000 V DC between contacts and 1500 V DC between contact and shield. The ambient temperature range is from -40 °C to +70 °C, enabling broad application in various environments. Tool-free fastening of the shield hood and simple cable strain relief reduce installation effort. The use of LSA-Plus cutting terminals with color coding increases installation safety and reduces error sources.