| General |
| Product type | IP camera |
| Chip type | Aptina AR0330 Color CMOS |
| Sensor size | 1/3" |
| Current supply | PoE |
| Data transmission | 10/100 MBit/s |
| Horizontal field of view | 360° |
| Vertical viewing angle | 180° |
| Frame rate | 30 frames per second |
| Resolution | 2160 x 2160 to 256 x 144 pixels |
| Colour | Silver |
| Mounting plate | 120 x 120 mm |
The product is an IP camera module by Telecom Behnke, model number 43-9582C, specifically developed as an add-on for door intercom systems in industrial and commercial applications. It is an
IP camera with an integrated network connection, transmitting data over the Ethernet network and powered simultaneously via PoE (Power over Ethernet). The camera is designed for rear mounting and is supplied with a mounting plate of 120 mm × 120 mm, enabling secure fixation to a wall or enclosure. The color design is in
silver, ensuring neutral integration into technical environments.
Applications
The camera is designed for use in door intercom systems where visual monitoring of the entrance area is required. Due to the
panoramic view and a horizontal field of view of
360° as well as a vertical field of view of
180°, it is particularly suitable for areas requiring comprehensive visibility of the access zone. The camera can be installed indoors, with the mounting plate enabling stable fixation to vertical surfaces.
Functions and Equipment in Detail
The camera features a
Color CMOS sensor of type Aptina AR0330 with a sensor size of 1/3 inch. This sensor enables the capture of color images with high detail accuracy. The resolution varies depending on the operating mode between 2160 × 2160 pixels (Ultra-HD) and 256 × 144 pixels (very low), allowing the camera to be flexibly adapted to different transmission conditions and requirements. The frame rate reaches up to
30 frames per second, ensuring smooth display of movements. The panoramic view enables comprehensive monitoring of the surroundings, with the camera displaying the entire environment in a single image.
Technology Explained Simply
The camera uses
PoE (Power over Ethernet) technology, enabling both data transmission and power supply via a single Ethernet cable. This reduces the number of required cables and simplifies installation. Data transmission occurs via the Ethernet standard
10/100 MBit/s, which is sufficient for transmitting video and control data in local networks.
Compatibility and Accessories
The module is intended as an add-on for existing door intercom systems and is specifically developed for integration into Telecom Behnke systems. It is not designed as a standalone device for video surveillance, but as an add-on module to be integrated into existing installations. The mounting plate of 120 mm × 120 mm is part of the delivery and serves for fixation to a wall or enclosure.
Mounting and Installation
The camera is designed for rear mounting, meaning it is mounted behind a front panel or housing. Installation is carried out using the included mounting plate, which enables secure fixation to a vertical surface. Installation requires an Ethernet connection supplied via PoE.
Advantages in Operation
The camera provides comprehensive visibility of the access area through the panoramic view and wide field of view. The flexible resolution setting allows adaptation to respective network conditions. PoE technology simplifies installation, as only one cable is needed for power and data.