| Technical data |
| CAT | CAT6A |
| Sheath | LSZH (halogen-free) |
| Shielding | S-STP(S/FTP) pair foil shielded |
| Colour | Black |
| Length | 20m |
| Connector type | Long |
| Cable type | Round |
| AWG (single conductor size) | 26 |
| POE cable power | POE/POE+/POE++ |
| MHz | 500Mhz |
| Cable outer diameter mm | 6.20 |
The patch cable from Synergy 21, manufacturer's number S216500, is a high-quality data cable of category
Cat6A with a bandwidth of
500 MHz, designed for use in modern network infrastructures. It features
S-STP (S/FTP) shielding, where each pair of conductors is protected by foil shielding and additionally by an overall metal braid shield, ensuring high immunity against electromagnetic interference. The cable is
halogen-free (LSZH), minimizing the formation of toxic gases in case of fire and increasing safety at the installation site. The cable length is
20 meters, the outer jacket thickness is
6.20 mm, and the cable is finished in
black color. The connectors are
long, made of polycarbonate, with gold-plated contacts and a latch nose protection, ensuring a secure connection and mechanical stability. The individual conductor size is
26 AWG, providing sufficient conductivity for use in networks with PoE technology (Power over Ethernet). The cable supports
PoE, PoE+ and PoE++, enabling power supply to network devices such as IP cameras, access points, or telephones via the network cable. The operating temperature range is between
-20 °C and +75 °C, allowing use in indoor and outdoor environments under normal ambient conditions. The minimum bending radius is
60 mm, enabling flexible installation even in confined spaces. The cable is certified according to
ISO/IEC 11801 Class Ea Channel Link and
ANSI/TIA-568-C.2, guaranteeing compliance with international standards for network cables. Electrical testing includes 100 % open-short and mis-wire tests, insulation resistance testing at DC 300 V with a minimum value of 10 MΩ, and contact resistance testing with a value of 1 Ω per meter. Packaging is done in a PE bag with label and blister packaging, and each cable strand is delivered with a test report confirming compliance with the mentioned standards.
Applications
This patch cable is designed for use in professional networks, particularly in environments requiring high data rates and reliability, such as data centers, office buildings, industrial facilities, or during the installation of IP surveillance systems. The S-STP shielding makes it especially suitable for areas with high electromagnetic interference, such as near motors, transformers, or other electrical equipment. The halogen-free jacket coating meets requirements for fire protection and smoke development, making it suitable for use in public buildings and rooms with high safety requirements.
Functions and Equipment in Detail
The cable shielding consists of a combination of pair foil and overall braid shielding (S/FTP), providing effective protection against EMI (electromagnetic interference) and RFI (radio frequency interference). The connectors are equipped with a latch nose protection, ensuring a secure and stable connection and protecting the cable from mechanical stress. The gold-plated contacts ensure a reliable electrical connection and prevent oxidation. The cable length of 20 meters allows flexible cabling over longer distances without requiring additional extensions or switches. The black color is standard in IT infrastructures and integrates well into existing cabling systems.
Technology Explained Simply
The designation
Cat6A refers to a cable category designed for data transmission rates up to 10 Gbit/s over distances up to 100 meters. The
S-STP (S/FTP) shielding means that each pair of conductors is individually shielded with metallic foil and additionally the entire cable is surrounded by a metal braid, providing particularly high resistance to interference. The
LSZH designation (Low Smoke Zero Halogen) means that the cable emits little smoke and releases no toxic halogens in case of fire, increasing safety at the installation site.
PoE support enables the transmission of power and data over a single cable, simplifying the installation of network devices. The
bandwidth of 500 MHz ensures high data transmission rates and minimizes signal loss over the entire cable length.
Compatibility and Accessories
The cable is compatible with all devices supporting the standards
ISO/IEC 11801 Class Ea and
ANSI/TIA-568-C.2. It can be combined with various accessory items, such as cable ties (L160 x B2.6 mm, L200 x B3.6 mm, transparent), hook-and-loop tape (25 m, B 20 mm, black), cable tie hook-and-loop (L150 x B12 mm, pack of 20, black), or flexible cable organizers (9–65 mm, 10 m, black), also offered by Synergy 21. These accessories support orderly and structured cabling, especially in server rooms or during the installation of network infrastructures.
Installation and Mounting
Installation is done by simply inserting the RJ45 connectors into the corresponding sockets of switches, routers, computers, or other network devices. The long connectors allow for a secure connection, even in deep sockets. The minimum bending radius of 60 mm allows flexible routing, even in confined spaces or when running through cable ducts. The halogen-free jacket coating requires no special precautions during installation, although cable routing should be done to avoid mechanical damage.
Operational Advantages
The patch cable offers high reliability and stability in data transmission, even over long distances. The S-STP shielding ensures minimal interference, which is particularly advantageous in critical applications. PoE support reduces the number of required power cables and simplifies installation. The halogen-free jacket coating increases safety during operation, especially in enclosed spaces. Certification according to international standards guarantees compatibility with modern network devices and compliance with quality standards.