Synergy 21 S216466, EAN: 4038816225580

Synergy 21 S216466 Cat6A Patch Cable 5m red

Cables > Data lines > Cat6 Patch Cable

Synergy 21 S216466 Cat6A Patch Cable 5m red

Lieske Part No. 527008
Mfg Part No S216466
EAN-Code 4038816225580
Manufacturer Synergy 21
Here only 5,22 EUR
6,21 EUR incl. VAT

Further information for Synergy 21 S216466 Cat6A Patch Cable 5m red

Technical data
CATCAT6A
SheathLSZH (halogen-free)
ShieldingS-STP(S/FTP) pair foil shielded
Length5m
ColourRed
Connector typeLong
Cable typeRound
AWG (single conductor size)26
POE cable powerPOE/POE+/POE++
MHz500Mhz
Cable outer diameter mm6.20
The patch cable of the brand Synergy 21, type S216466, is a data cable of category CAT6A with a bandwidth of 500 MHz, designed for use in modern network infrastructures. It features S-STP (S/FTP) shielding, where each pair of conductors is individually covered with a foil shield, and additionally, an outer braid made of aluminium-brass (AL-MG) protects the entire cable. This construction ensures a high level of protection against electromagnetic interference and enables reliable data transmission even in critical environments. The cable is equipped with RJ45 connectors at both ends, featuring a latch nose protection to ensure a secure connection. The connectors are made of polycarbonate and have gold-plated contacts, which enhances contact quality and durability. The connector design is long, providing better fit in standard network ports.

Applications
This patch cable is suitable for use in networks requiring high bandwidth and signal integrity, for example in office and server environments, for connecting switches, routers, PCs, or network devices. The CAT6A category enables data transmission rates up to 10 Gbit/s over a distance of up to 100 meters in channel mode according to ISO/IEC 11801 Class Ea. The LSZH jacket (halogen-free, low smoke density) makes the cable particularly suitable for indoor use, as no toxic gases are released in case of fire. The operating temperature ranges from -20 °C to +75 °C, allowing use in a wide range of environments.

Functions and Equipment in Detail
The cable has a length of 5 meters and an outer diameter of 6.2 mm. The individual conductors have a gauge of 26 AWG, ensuring sufficient conductivity for PoE applications. The cable supports PoE, PoE+ and PoE++, enabling power delivery to network devices such as IP cameras, access points, or telephones via the network cable. The minimum bending radius is 60 mm, which must be observed during installation to avoid mechanical damage. The cable is packaged in a blister pack by Synergy 21, protecting it from mechanical stress.

Technology Explained Simply
The S-STP (S/FTP) shielding technology means that each of the four conductor pairs is individually shielded with a metallic foil, and additionally, an outer braid surrounds the entire cable. This protects the signals from external interference and simultaneously prevents electromagnetic radiation (cross-talk). The use of LSZH material for the jacket ensures that no toxic gases are produced in case of fire, increasing safety in indoor environments. The RJ45 connectors with latch nose protection ensure a stable mechanical connection and prevent accidental disconnection.

Compatibility and Accessories
The cable is compatible with all devices supporting RJ45 connectors and meeting the standards ISO/IEC 11801 Class Ea, EN 50173-1, and ANSI/TIA-568-C.2. It can be combined with various accessories, such as cable ties (lengths 160 mm, 200 mm, hook-and-loop tape 25 m) or flexible cable organizers (9–65 mm, 10 m), also offered by Synergy 21. These products support proper cable routing and management in rack or enclosure environments.

Installation and Mounting
During installation, the minimum bending radius of 60 mm must be observed to maintain the mechanical integrity of the cable. The connectors are pre-installed, so no additional tools are required. Connection is achieved by simply plugging into the RJ45 sockets of the devices. The red colour of the cable facilitates identification in complex cable installations.

Operational Advantages
The patch cable offers high reliability at high data rates and is suitable for use in PoE networks. The S-STP shielding technology ensures minimal interference, which is particularly beneficial in environments with high electromagnetic noise. The halogen-free jacket increases safety in indoor applications. The blister packaging protects the cable until installation and facilitates storage.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/527008
qrcode für Synergy 21 S216466 Cat6A Patch Cable 5m red