Synergy 21 S216465, EAN: 4038816225573

Synergy 21 S216465 Cat6A Patch Cable 3m red

Cables > Data lines > Cat6 Patch Cable

Synergy 21 S216465 Cat6A Patch Cable 3m red

Lieske Part No. 999739
Mfg Part No S216465
EAN-Code 4038816225573
Manufacturer Synergy 21
Here only 3,59 EUR
4,27 EUR incl. VAT

Further information for Synergy 21 S216465 Cat6A Patch Cable 3m red

Technical data
CATCAT6A
SheathLSZH (halogen-free)
ShieldingS-STP(S/FTP) pair foil shielded
Length3m
ColourRed
Connector typeLong
Cable typeRound
AWG (single conductor size)26
POE cable powerPOE/POE+/POE++
MHz500Mhz
Cable outer diameter mm6.20
The patch cable from Synergy 21, type S216465, is a data cable of category Cat6A with a bandwidth of 500 MHz, specifically designed for use in modern network infrastructures. It features S-STP (S/FTP) shielding, where each pair of conductors is individually shielded with a foil layer, and an outer braid provides additional protection for the entire cable. This shielding system ensures high immunity against electromagnetic interference and minimizes crosstalk, which is essential for critical applications in office environments or industrial networks. The cable is red, enabling easy visual identification in cable management, and has a length of 3 meters. The connectors at both ends are RJ45 connectors with latch nose protection, ensuring a secure and stable connection. The connectors are equipped with a long housing, which provides better mechanical stability and facilitates easy installation in standard 48,3 cm ( 19 inch ) rack systems. The individual conductor gauge is 26 AWG, ensuring sufficient conductivity for transmitted data and power supply via PoE.

Applications
This cable is suitable for use in networks with high requirements for data rate and signal integrity, such as Gigabit and 10-Gigabit Ethernet environments. The support for PoE, PoE+, and PoE++ also makes it suitable for powering network devices such as IP cameras, access points, or telephones, with power delivered over the network cable. The LSZH insulation (halogen-free) ensures low smoke emission and no release of harmful halogens in case of fire, making it suitable for use in enclosed spaces and buildings with high safety requirements. The operating temperature range is between -20 °C and +75 °C, allowing use in a wide range of indoor and industrial environments.

Functions and Equipment in Detail
The S/FTP shielding provides a double layer of protection: each of the four conductor pairs is individually shielded with a metallic foil, and the entire cable is surrounded by a metallic braid. This reduces electromagnetic interference and ensures clear signal transmission. The outer diameter of the cable is 6.2 mm, enabling a compact design without compromising mechanical stability. The connectors are equipped with latch nose protection, which reduces mechanical stress and increases the lifespan of the connection. The cable is packaged in a blister pack from Synergy 21, which protects the cable from mechanical damage and allows for clean presentation.

Technology Explained Simply
The designation Cat6A refers to a cable category designed for a maximum bandwidth of 500 MHz, making it suitable for data transmission rates up to 10 Gbit/s over short distances. This prevents interference from external electromagnetic fields and minimizes crosstalk between conductors. The LSZH insulation (Low Smoke Zero Halogen) is a material that emits only minimal smoke and no toxic halogens when exposed to heat or fire, which is important for safety in enclosed spaces. The PoE support enables power delivery to network devices over the same cable that carries data, simplifying installation and reducing the number of required cables.

Compatibility and Accessories
The cable is compatible with all devices supporting RJ45 connectors and the standards ISO/IEC 11801 Class Ea, EN 50173-1, and ANSI/TIA-568-C.2. It can be used in standard 48,3 cm ( 19 inch ) racks and switches. Various cable management accessories are available, such as cable ties, velcro straps, and cable organizers, which enable orderly routing and securing of the cable. These products are also from Synergy 21 and match the patch cable in design and color.

Installation and Mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The connectors feature latch nose protection, ensuring a secure connection. The minimum bending radius is 60 mm, which must be considered during installation to avoid mechanical damage. The blister packaging facilitates storage and transport, as the cable is protected from mechanical stress.

Operational Advantages
The patch cable offers high signal quality due to the double shielding and high bandwidth of 500 MHz. PoE technology support reduces the need for additional power supplies and simplifies installation. The halogen-free insulation increases safety in case of fire. The red color facilitates identification in cable management, and the robust construction with long connectors ensures long service life and stable connections. The cables are 100 % electrically tested, guaranteeing high quality and reliability.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/999739
qrcode für Synergy 21 S216465 Cat6A Patch Cable 3m red