Synergy 21 S216431, EAN: 4038816225238

Synergy 21 S216431 Cat6A Patch Cable Green

Cables > Data lines > Cat6 Patch Cable

Synergy 21 S216431 Cat6A Patch Cable Green

Lieske Part No. 119622
Mfg Part No S216431
EAN-Code 4038816225238
Manufacturer Synergy 21
Here only 1,49 EUR
1,77 EUR incl. VAT

Further information for Synergy 21 S216431 Cat6A Patch Cable Green

Technical data
CATCAT6A
SheathLSZH (halogen-free)
ShieldingS-STP(S/FTP) pair foil shielded
Length0,5m
ColourGreen
Connector typeLong
Cable typeRound
AWG (single conductor size)26
POE cable powerPOE/POE+/POE++
MHz500Mhz
Cable outer diameter mm6.20
The patch cable from the brand Synergy 21, manufacturer's number S216431, is a data cable of category CAT6A with a bandwidth of 500 MHz. It is designed as a round cable, has a length of 0.5 metres, and is available in the colour green. The cable is designed for use in networks requiring high data rates and stable signal transmission, for example in office or server environments. The connection is made via RJ45 connectors at both ends, which are equipped with a latch nose protection to ensure a secure and mechanically robust connection.

Applications

The cable is suitable for use in modern Ethernet networks, particularly in environments where high transmission rates and low signal interference are required. The CAT6A category enables data transmission rates up to 10 Gbit/s over the full cable length of 0.5 m. Typical use includes structured cabling systems, such as in data centres or for connecting switches, routers and end devices. The green colour facilitates visual identification in cable management.

Functions and Equipment in Detail

The cable is designed as S-STP (S/FTP), meaning that each individual wire pair is shielded with foil, and additionally the entire cable is surrounded by a metallic braid. This double shielding ensures high immunity against electromagnetic interference (EMI) and prevents crosstalk between the wires. The AWG26 wire gauge (corresponding to a diameter of approximately 0.4 mm) ensures sufficient conductivity and mechanical stability. The jacket materials are LSZH (halogen-free), which minimises the formation of toxic smoke gases in the event of fire and increases safety at the installation site.

Technology Explained Simply

The designation S-STP (also referred to as S/FTP) stands for Shielded Twisted Pair with additional shielding of the wire pairs. This technology is used to maintain signal quality in environments with high electromagnetic interference levels. The frequency bandwidth of 500 MHz enables the use of the cable for 10-Gigabit-Ethernet applications. The LSZH insulation is particularly advantageous in enclosed spaces, such as server rooms or offices, as it does not release toxic gases when heated. The RJ45 connectors with latch nose protection provide a secure mechanical connection and prevent accidental disconnection.

Compatibility and Accessories

The patch cable is compatible with all standard RJ45 connectors commonly used in IT infrastructure. It can be connected to devices such as network switches, routers, PCs, laptops and other Ethernet-capable end devices. As accessories, various cable ties and cable organisers are available, including transparent and black cable ties in different lengths, as well as flexible spiral organisers. These support proper cable management and reduce cable clutter in enclosures or at workstations.

Installation and Mounting

Installation is carried out by simply plugging the RJ45 connectors into the corresponding sockets. The cable connection is therefore quick and tool-free. The cable strength and shielding ensure that the cable remains stable even under mechanical stress, such as bending or pulling. The length of 0.5 m is suitable for short connections within enclosures or between devices on a desk.

Operational Advantages

The double shielding (S-STP) ensures high signal integrity, which is particularly important at high data rates. The halogen-free insulation increases safety in use, especially in enclosed spaces. The green colour supports visual differentiation in cable management. The cable is suitable for use with PoE, PoE+ and PoE++, meaning it can transmit power over the network cable without requiring additional power lines. Packaging is done in a blister pack, which protects the cable from mechanical damage and enables clean presentation. Each cable is supplied with a test report confirming compliance with technical specifications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/119622
qrcode für Synergy 21 S216431 Cat6A Patch Cable Green