| Technical data |
| CAT | CAT6A |
| Sheath | LSZH (halogen-free) |
| Shielding | S-STP(S/FTP) pair foil shielded |
| Colour | Grey |
| Length | 5m |
| Connector type | Long |
| Cable type | Round |
| AWG (single conductor size) | 26 |
| POE cable power | POE/POE+/POE++ |
| MHz | 500Mhz |
| Cable outer diameter mm | 6.20 |
The patch cable from Synergy 21, manufacturer's number S216406, is a data cable of category
Cat6A with a bandwidth of 500 MHz. It is used to connect network devices such as switches, routers, PCs, or network printers in local area networks (LAN). The cable is
round and has a length of 5 meters. The jacket color is
grey, making it easily identifiable and uniformly designed in standardized IT infrastructures. The jacket is made of
LSZH material (halogen-free), which releases only minimal smoke and toxic gases in case of fire, which is particularly advantageous in enclosed spaces such as server rooms or offices.
Functions and equipment in detail
The cable is designed as
S-STP (S/FTP), meaning that each pair of conductors is shielded with foil, and additionally, a total shield made of a metallic braid surrounds the entire cable. This shielding reduces electromagnetic interference and ensures high signal quality, especially in environments with high electromagnetic noise. The connectors at both ends are
RJ45 connectors with strain relief protection, enabling a secure and stable connection to network ports. The connectors feature a
long housing (long body), providing better mechanical stability and secure locking in the network port.
Technology explained simply
The cable construction is based on a
26 AWG (American Wire Gauge) single conductor size, which provides sufficient conductivity for data transmission up to 10 Gbit/s over short distances. The S-STP (S/FTP) shielding technology ensures that each pair of conductors is individually shielded and the entire cable is additionally protected by a metallic braid. This minimizes sensitivity to electromagnetic interference (EMI) and crosstalk. The bandwidth of 500 MHz corresponds to the specification for
ISO/IEC 11801 Class Ea Channel Link and
ANSI/TIA-568-C.2, confirming suitability for high-speed applications. The cable is suitable for use with
PoE (Power over Ethernet),
PoE+, and
PoE++, enabling power supply over the network cable – useful for IP cameras, access points, or telephone systems.
Compatibility and accessories
The patch cable is compatible with all devices that support RJ45 connectors and Cat6A or higher-grade network cables. It can be used in existing network infrastructures where high data rates and low error rates are required. As accessories, various cable ties, hook-and-loop tape, and cable organizers from Synergy 21 are available, which assist in proper routing and securing of cables in server rooms or enclosures. These products support structured and clear cable management.
Installation and mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding network ports. The connectors feature strain relief protection, preventing accidental disconnection. The minimum bending radius is 60 mm, which must be considered during installation to avoid mechanical damage. The cable is designed for an operating temperature range of -20 °C to +75 °C, allowing use in indoor environments as well as in controlled outdoor areas.
Advantages in operation
The patch cable provides reliable and high-quality data transmission with low error susceptibility. The S-STP shielding ensures high immunity to interference, which is particularly important in environments with many electrical devices or near motors, transformers, or other interfering sources. Support for PoE technologies expands application possibilities, as no additional power supplies are required for connected devices. The halogen-free jacket coating meets requirements for fire safety and smoke development, which is required in many public and commercial facilities. The cable is delivered in a blister pack, ensuring protection during transport and storage.