| Technical data |
| Connector type | standard |
| Number of fibres/ports | 2 (Duplex) |
| Product type | Patch cable |
| Side A | LC/UPC (flat polish) |
| Conductor diameter in mm | 3,0 mm |
| Side B | LC/UPC (flat polish) |
| Length in metres | 10 m |
| Fibre type | OM3_50/125u |
This product is an LWL patch cable from the brand Synergy 21, manufacturer's number S216229, designed for use in indoor network infrastructures. It is a duplex cable with two optical fibres designed for multimode transmission. The fibre type corresponds to the OM3 standard with a core diameter of 50 µm and a cladding diameter of 125 µm. The cable is 10 metres long and features LC/UPC connectors with flat polish at both ends, ensuring a precise and stable optical connection. The cable colour is light blue, typical for OM3 multimode cables, enabling easy identification in cable management. The cable is designed for indoor use and complies with the LSZH (halogen-free) standard, ensuring reduced smoke development and toxicity in case of fire.
Applications
This LWL patch cable is suitable for use in local area networks (LAN) and data centres where high data rates need to be transmitted over short to medium distances. The OM3 fibre enables data transmission rates up to 10 Gbit/s over a distance of up to 300 metres, with the exact range depending on the network topology and the devices used. Use in indoor environments is intended due to the construction and materials; it is not designed for outdoor use.
Functions and Equipment in Detail
The cable has a conductor diameter of 3.0 mm, providing sufficient mechanical stability and flexibility. The LC connectors are equipped with a white protective boot and a dust cap to protect the optical end faces from contamination. The connectors feature a clip for secure mounting in a patch panel or switch. The fibres are designed with a minimum bending radius of 7.5 mm, ensuring flexible installation without damaging the fibre.
Technology Explained Simply
The OM3 fibre is a multimode optical fibre cable optimised for high bandwidth and short to medium transmission distances. The designation OM3 stands for Optical Multimode Fiber, Category 3, and is particularly suitable for 10-Gigabit-Ethernet applications. LC connectors are small, compact connectors commonly used in modern networks. The UPC polish (Ultra Physical Contact) ensures low reflection and a stable optical contact. The halogen-free insulation (LSZH) reduces the formation of toxic gases and smoke in case of fire, increasing safety in the operating environment.
Compatibility and Accessories
The cable is compatible with all devices supporting LC/UPC connectors for multimode OM3 fibres, such as switches, routers, patch panels, and servers. Suitable accessories include LWL patch panels for 24xLC duplex sockets, LC couplers, fibre strippers, Kevlar scissors, stripping tools, fibre testers, as well as cable ties and cable organisers. These components support the installation, maintenance, and management of the fibre optic infrastructure.
Installation and Mounting
Installation is performed by simply inserting the LC connectors into the corresponding sockets of the network devices. Cable routing should respect the minimum bending radius of 7.5 mm to avoid damaging the fibre. The use of cable organisers or cable ties can help route the cable neatly and ensure proper management. The connectors feature a clip for secure mounting in the patch panel.
Advantages in Operation
The cable provides reliable and stable data transmission with high bandwidth. The halogen-free insulation increases safety in the operating environment. The LC connectors enable a compact and secure connection that is easy to handle. The light blue cable colour facilitates identification and management in cable management. The cable is packaged in a blister pack, protecting it from contamination and mechanical damage.