Synergy 21 S216088, EAN: 4038816222725

Synergy 21 S216088 Cat6 Patch Cable 15m gray

Cables > Data lines > Cat6 Patch Cable

Synergy 21 S216088 Cat6 Patch Cable 15m gray

Lieske Part No. 908503
Mfg Part No S216088
EAN-Code 4038816222725
Manufacturer Synergy 21
Here only 9,84 EUR
11,71 EUR incl. VAT

Further information for Synergy 21 S216088 Cat6 Patch Cable 15m gray

Technical data
SheathLSZH (halogen-free)
ShieldingS-STP(S/FTP) pair foil shielded
ColourGrey
Length15m
MHz250Mhz
CATCAT6
Connector typeLong
Cable typeRound
Cable outer diameter mm5.80
AWG (single conductor size)27
POE cable powerPOE/POE+/POE++
The patch cable from Synergy 21, manufacturer's number S216088, is a Cat6 data cable with a length of 15 meters, designed for use in networks with high requirements for bandwidth and signal quality. The cable features S-STP (S/FTP) shielding, where each pair of conductors is individually shielded with foil and additionally protected by an outer braid that encloses the entire cable. This construction ensures effective shielding against electromagnetic interference (EMI) and enables stable data transmission even in environments with high electromagnetic noise. The jacket is made of LSZH material (halogen-free, low smoke emission), which increases safety in case of fire and recommends its use in enclosed spaces such as server rooms or offices. The cable color is gray, allowing for discreet integration into existing infrastructures.

Applications

The cable is designed for use in professional network infrastructures, particularly in environments where high data integrity and reliability are required. Typical applications include connecting switches, routers, network devices, and end devices such as computers or IP cameras. Support for PoE, PoE+, and PoE++ makes it especially suitable for powering PoE-enabled devices such as IP phones, surveillance cameras, or access points, where power and data are transmitted over a single cable. The maximum frequency of 250 MHz meets the requirements of Category 6 and enables data rates up to 10 Gbit/s over short distances, with the 15-meter length falling within the specified limits.

Functions and Equipment in Detail

The connectors at both ends are RJ45 connectors with strain relief, ensuring a secure and mechanically stable connection. The contact surfaces are gold-plated (3 µm), providing high corrosion resistance and reliable electrical contact even with frequent plugging and unplugging. The connector housing is nickel-plated, enhancing mechanical durability. The conductor gauge is 27 AWG, ensuring sufficient conductivity for the intended applications. The cable construction complies with the standards ISO/IEC 11801, EN50173-1, and ANSI/TIA-568-C.2, ensuring compatibility with international standards.

Technology Explained Simply

The S-STP shielding (also known as PIMF) means that each of the four conductor pairs is individually wrapped in a metallic foil, minimizing crosstalk between pairs. The outer braid protects the entire cable from external electromagnetic influences. This double shielding is particularly important in environments with strong interference sources, such as near motors, transformers, or other electrical equipment. The LSZH material of the jacket is non-flammable at high temperatures, emits only minimal smoke in case of fire, and contains no halogen compounds, increasing safety in the event of a fire.

Compatibility and Accessories

The cable is compatible with all devices supporting the Cat6 standard. It can be used in existing networks with RJ45 ports. As accessories, various cable ties and cable organizers are available, including transparent cable ties in different lengths (e.g., 160 mm and 200 mm), hook-and-loop tape (150 mm × 12 mm), and flexible spiral organizers (9–65 mm, 10 m). These products support proper cable routing and securing, especially in 48,3 cm ( 19 inch ) racks or during cable installation in server rooms.

Installation and Mounting

Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The connectors feature strain relief, preventing accidental disconnection. The minimum bending radius is 60 mm, which should be considered during installation to avoid mechanical damage. The cable is designed for an operating temperature range of -20 °C to +75 °C, enabling use in a wide range of indoor and outdoor environments, provided ambient conditions remain within these limits.

Operational Advantages

The combination of S-STP shielding, LSZH jacket, and PoE support makes the cable a robust and safe solution for professional networks. The high frequency of 250 MHz and the use of gold-plated contacts ensure reliable and fast data transmission. Use in PoE systems reduces the number of required cables and simplifies installation, as power and data are transmitted over a single cable. Compliance with international standards ensures interoperability with other network products.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/908503
qrcode für Synergy 21 S216088 Cat6 Patch Cable 15m gray